25
en
Cleaning and servicing
Adding more ingredients
Fig.
J
-8:
■ Switch off the appliance with the rotary
switch.
■ Remove the lid and add ingredients
or
■ remove the funnel and gradually add solid
ingredients through the refill opening
or
■ pour liquid ingredients through the funnel.
After using the appliance
■ Switch off the appliance with the rotary
switch.
■ Rotate the blender in a clockwise direction
and remove.
Tip:
It is recommended to clean the blender
immediately after use.
Cleaning and servicing
Attention!
Do not use abrasive cleaning agents.
Surfaces may be damaged.
Cleaning the base unit
W
Danger of electric shock!
Never immerse the base unit in water or
place under running water. Do not use a
steam cleaner.
■ Remove mains plug.
■ Wipe the base unit and drive cover with
a damp cloth. If required, use a little
detergent.
■ Then dry the base unit.
Cleaning the bowl and tools
The bowl and tools are dishwasherproof.
Do not wedge plastic parts in the dish
washer, as they could be permanently
deformed during the washing process!
Cleaning the continuous-feed
shredder
All parts of the continuousfeed shredder are
dishwasherproof.
Tip:
To remove the red film after processing
e.g. carrots, pour a little cooking oil on a
cloth and rub the film off the continuous-feed
shredder (not the cutting discs). Then rinse
the continuousfeed shredder.
Cleaning the blender
W
Risk of injury from sharp blades!
Do not touch blender blades with bare
hands.
The blender jug, lid and funnel are
dishwasherproof.
Tip:
After processing liquids, it is often
sufficient to clean the blender without
removing it from the appliance. Pour a
little water and washingup liquid into the
attached blender. Switch on the blender for
several seconds (setting
M
). Pour out the
water and rinse out the blender with clear
water.
Important information
If required, clean accessories bag. Follow
care instructions in the bag.
Storage
W
Risk of injury!
When the appliance is not in use, pull out
the mains plug.
Fig.
K
:
■ Store tools and cutting discs in the
accessories bag.
■ Keep accessories bag in the bowl.
■ To store in the original packaging, see
Fig.
L
.
Troubleshooting
W
Risk of injury!
Before eliminating a fault, pull out the mains
plug.
Important information for
MUM54../MUM56..
The Operating indicator flashes if the
appliance has been operated incorrectly
or the electronic fuse has tripped or the
appliance is defective.
The swivel arm must be engaged in every
operating position.
Initially try to eliminate the problem which
has occurred with the help of the following
information.
