Bosch MSM66 RU Series, Инструкция по эксплуатации, Страница: 4 / 22

4
en Safety instructions
Congratulations on the purchase of
your new Bosch appliance. You can find
further information about our products
on our website.
Do not immerse the appliance in the ingredients above the blender
foot-base unit connection point. After each use, whenever the
appliance is unsupervised, prior to assembly, prior to disassembly,
prior to cleaning and in the event of an error, the appliance must
always be disconnected from the mains.
W
Warning!
Risk of injury!
Care should be taken when handling sharp cutting blades and emp-
tying the bowl as well as during cleaning. Immediately after using the
appliance, wait for the blade in the blender foot to come to a standstill.
Prior to replacing accessories or replacement parts that are moved
during operation, the appliance must be switched off and disconnected
from the mains. Do not attach or remove accessories until the appli-
ance is at a standstill. Never grip the blade in the blender foot. Never
clean the blade in the blender foot with bare hands. Use a brush.
W Warning!
Risk of scalding!
Take care when processing hot food. Hot food may splash during
processing. Never place blender foot on hot surfaces or use in very
hot food. Leave boiling food to cool down to at least 80°C before
processing. Before using the hand blender in a cooking pot, take
the pot off the hotplate.
W Warning!
Risk of suffocation!
Do not allow children to play with packaging material.
Contents
Intended use ...............................................3
Safety instructions ......................................3
Overview.....................................................4
Operation ....................................................5
Cleaning .....................................................5
Recipes and tips .........................................6
Disposal ......................................................6
Guarantee...................................................6
Overview
Please fold out the illustrated pages.
X Fig.
A
1 Base unit
2 Power cord
3 Speed control
Operating speed can be adjusted
continuously between the lowest (●) and
highest (
12
) speed (only in conjunction
with button 4a ).
4 On button
The hand blender remains switched on as
long as an On button ( a or b ) is pressed.
a Controllable speed
(with speed control 3 )
b Turbo speed
The turbo speed is used for the
universal cutter (if included in delivery).