Bosch MSK030B NSNN Series Скачать руководство пользователя

Страница: 109 / 178

Accessories

8.1

Transmission

ATEX motors

Danger of explosion and life or high damage

to property!

WARNING

Gearboxes which are mounted and operated on MSK ATEX motors must cor‐

respond to the demand for Ex-protection according to the 94/9/EG directive.
Please observe the notes within the product documentaions of the used com‐

ponents when projecting and during operation.

Rexroth does not offer or supply ATEX-compliant servo planetary gears for

the attachment to MSK-ATEX motors, either individually or mounted on mo‐

tors.
Various transmission manufacturers have explosion-protected transmissions

in their scope of supply. If necessary, contact the following supplier recom‐

mended by Rexroth, for example:
Neugart GmbH, Keltenstr. 16, 77971 Kippenheim, Germany

www.neugart.de

Attachment of transmissions on

motors

If transmissions are attached to motors, the thermal coupling of the motors to

the machine or system design changes. Depending on the type of transmis‐

sion, the amount of heat generated at the transmission varies. In any case,

the heat dissipation of the motor via the flange is reduced when the transmis‐

sion is attached. This must be taken into account when planning the system.

In order not to thermally overload motors when using transmissions, it is nec‐

essary to reduce the specified performance data.

S1(60K) motor Continuous operating characteristic curves S1 motor

S1(60K) gear Continuous operating characteristic curves S1 motor with

transmission attachment

Fig. 8-1:

S1 characteristic curve transmission

The torques specified in the motor characteristics must be re‐

duced by approx. 20-30% when attaching transmissions.

Observe all other notes and requirements in the documentation for the trans‐

missions used.

DOK-MOTOR*-MSK*EXGIIK3-PR09-EN-P

Bosch Rexroth AG

107/175

Synchronous Servomotors MSK For Potentially Explosive Areas

Accessories

Содержание MSK030B NSNN Series



















































































































































































Результаты поиска

Содержание MSK030B NSNN Series

Отзывы:

Похожие инструкции для MSK030B NSNN Series

Бренды по названию

Популярные бренды

Bosch MSK030B NSNN Series, Руководство по планированию проекта

Результаты поиска

Содержание MSK030B NSNN Series

Отзывы:

Похожие инструкции для MSK030B NSNN Series

Бренды по названию

Популярные бренды