manualshive.com logo in svg

Bosch MS 3 Sport GT3 Cup, Руководство пользователя

Поделиться
Скачать
Bosch MS 3 Sport GT3 Cup Скачать руководство пользователя страница 20

4 | Starting up the ECU

20 / 24

Engine_Control_Unit_MS_3_Sport_GT3_Cup_Manual

Bosch Motorsport

4.2.3 Lambda Value Detection

The label LAMDET contains parameters to calibrate lambda value detection.

LAMTYPE_CW

Select the sensor type. Set to ’0’ for LSU 4.9, set ’1’ for LSU 4.9.

Keep the predefined values for other parameters.

4.2.4 Throttle-Plate Angle Detection

The label ATHDET contains parameters to calibrate throttle-plate angle detection.

ATH_UMX, ATH_UMN

Maximum and minimum accepted sensor voltage. Set to approx. 250 mV / 4750 mV. If vi-

olated, an error is set (ath_e = 1).

Check if the sensor output value ‘ath_u’ is changing when throttle is moved.

CALIBRATION

These parameters calibrate the throttle-plate angle.

ATHPOS1

Lower calibration point. Set to 0.0 %.

ATHPOS2

Full load point. Set to 100.0 %.

ATHIDLECAL

Set to desired idle ATH value.

ATH_CW

Close throttle and set ATH_CW to 1.

Open throttle fully and set ATH_CW to 2.

Set throttle to idle point and set ATH_CW to 3.

Check calibration by moving throttle.

Содержание MS 3 Sport GT3 Cup

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды