manualshive.com logo in svg

Bosch MIC 612 Series, Руководство по эксплуатации

Поделиться
Скачать
Bosch MIC 612 Series Скачать руководство пользователя страница 31

Fit the Sunshield (MIC612)

The MIC612 Sunshield is designed to provide additional protection against direct solar
radiation. It is a two-part molding and comes supplied with eight (8) stainless steel stand-offs
and eight (8) stainless steel M3 washers and retaining screws.
The MIC612 stand-offs are slightly shorter than those for the MIC412 and have gnarled
threads at one end. The MIC412 stand-offs are slightly longer and are smooth at one end.

Stand-off for MIC612

Stand-off for MIC412

The MIC612 Sunshield is designed to provide additional protection against direct solar
radiation. It is a two-part molding and comes supplied with eight (8) stainless steel stand-offs
and eight (8) stainless steel M3 washers and retaining screws.

!

Caution!
DO NOT REMOVE the lid from the camera, and do not back drive the pan or tilt axis manually.
Doing so will void the warranty. Back driving may also strip teeth off the internal gears.

Figure 6.1: Graphical depiction of sunshield assembly

1

Stand-off, stainless steel

2

Sunshield

3

M3 x 10 mm screw, stainless steel, Pozidriv with pan head

4

M3 washer, stainless steel

 

6

 

MIC612 Thermal Camera

Fit the Sunshield (MIC612) | en

31

Bosch Security Systems

Operation Manual

2016.03 | 2.2 | F.01U.249.416

Содержание MIC 612 Series































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды