Bosch MCM64080, Руководство по эксплуатации

Страница: 16 / 226

16 Robert Bosch Hausgeräte GmbH
Preparation

Place the base unit on a smooth, clean
surface.

Pull cord out of the cord store to the
required length.
Bowl with accessories/tools
Universal blade (10)
for cutting and chopping.
Fig.


Attach the bowl (arrow on bowl on dot
on the appliance) and rotate as far
as possible in a clockwise direction.

Insert universal blade:
– Press the drive shaft into the tool
holder until it locks into position.
– Insert tool holder into the bowl.
– Place universal blade into the tool
holder and let go.

Add ingredients.

Attach lid (match arrow on lid on dot on
bowl) and rotate in a clockwise direction.
Lid lug must be located fully in the slot
in the bowl handle.

Insert pusher and pusher insert.

Insert the mains plug.

Set the rotary switch to the desired
setting.

To add more ingredients, set the rotary
switch to 0/off.

Remove the pusher and add ingredients
through the feed tube.

Add liquids through the pusher.
Pusher insert can be used as a measu-
ring jug.
Cutting discs
Reversible slicing disc –
thick/thin (12)
for slicing fruit and vegetables.
Designation on the reversible slicing disc:
“1” for the thick slicing side
“3“ for the thin slicing side
Warning!
The reversible slicing disc is not suitable for
slicing hard cheese, bread, rolls or chocolate.
Slice boiled, waxy potatoes only when they
are cold.
Reversible shredding disc –
coarse/fine (13)
for shredding vegetables, fruit and cheese,
except for hard cheese (e.g. Parmesan).
Designation on the reversible shredding disc:
“2” for the coarse shredding side
“4” for the fine shredding side
Warning!
The reversible shredding disc is not suitable
for shredding nuts. Shred soft cheese with
the coarse side only.
Note:
Discs suitable for further purposes are
available from dealers (see the chapter
“Optional accessories”).
en
Risk of injury from the rotating tools!
While the appliance is operating, never
place fingers in the mixing bowl.
Always use the pusher (7) for adding
ingredients. After switching off, the drive
continues running for a short time.
Change tools only when the drive
is at a standstill.
Warning!
When working with the bowl, the appliance
cannot be switched on until the bowl has
been attached and the lid has been
attached and screwed on tight.
Risk of injury from sharp blades!
Grip the universal blade by the edge
of the plastic handle only.
When not in use, always store the uni-
versal blade in the blade guard.
Warning!
Add ingredients to be processed always
after the tool has been inserted.
Risk of injury from sharp blades!
Do not grip the sharp blades or edges
of the cutting discs. Take hold of cutting
discs by the edge only.