Bosch MAP Control Center IUI-MAP0001-2, Руководство пользователя

Страница: 50 / 64

50 en | Operation MAP Control Center
2014.11 | 06 | F.01U.168.328 User Manual Bosch Sicherheitssysteme, GmbH
For more information on searching, sorting, and filtering, refer to Section Searching and
Sorting / Filtering, page 11 .
Figure 2.77 Sort / Filter Enable / Disable Device screen
2.8.4 Set Time and Date
On the Service menu ( Figure 2.63 Service Menu – screen 1, page 43 ), select Set Time and Date .
Use the Set Time and Date screen ( Figure 2.78 Set Time and Date screen, page 50 ) to set the
time and date:
1.
Press the date or time element to select the value to be modified.
2. Press the + or – button to increase or decrease the element's value.
3. Press the OK button when finished.
The 24-Hour button is inactive. It is a reminder that the hours range from 0 (midnight) through
23 (11 p.m.).
Figure 2.78 Set Time and Date screen
2.8.5 Walk Test
On the Service menu ( Figure 2.64 Service Menu – screen 2, page 43 ), press Walk Test . The
Walk Test screen ( Figure 2.79 Walk Test screen, page 51 ) identifies the available options:
– Start New Walk Test
– Resume Walk Test (This button is not active until after the first test is completed.)
– Start Seismic Test
– Print Walk Test (This button is not active until after the first test is completed.)