Bosch LTE 65EU, Руководство пользователя

Страница: 13 / 40

Tools | 4
Bosch Motorsport Telemetry_System_LTE65_Manual 13 / 40
4 Tools
4.1 LED Status Lights
– The LTE65 has 3 LED status lights providing information on the LTE65’s connection,
data type, and signal strength.
– At device power on, the life LED will turn blue indicating boot. After boot an LED func-
tion check will occur where all three LEDs will cycle through Red, Green, and Blue for
0.5 seconds each.
– If there is an initialization error, all three LEDs will turn red, and the device will reset it-
self.
– After the LED function check is complete, the table below can be used to understand
device information provided by the LEDs.
Life LED
Data LED
WAN LED
Blue solid
Boo!ng
Green blinking
Cloud connec!on in progress
Red solid
No cloud connec!on
Green solid
Cloud connec!on
Blue blinking
Ethernet data OUT of device
Red blinking
RS232 data OUT of device
Green blinking
Ethernet data INTO device
Violet blinking
RS232 data INTO device
Red solid
SIM / Cell network error
Red blinking
Connec!ng to cell network
Green blinking
Connected to cell network, signal good
Blue blinking
Connected to cell network, signal ok
Violet blinking
Connected to cell network, signal bad