Bosch LTC 2919/90, Инструкция по эксплуатации

Страница: 11 / 16

EN
| 11
Bosch Security Systems | 10 June 2004
LTC 2915/91, LTC 2917/91, & LTC 2919/90 | Instruction Manual | Operation
5 OPERATION
5.1 Front Panel Controls
(Figure 1)
OSD (#1): Selects on-screen display (OSD); saves
settings.
(#2 up): Multifunction;
First push – selects brightness function for
adjustment;
Brightness adjust mode – increases brightness level;
OSD menu – moves the cursor upward
(#2 down): Multifunction;
First push – selects brightness function for
adjustment;
Brightness adjust mode – decreases brightness level;
OSD
menu – moves the cursor downward
(#2 left): Multifunction;
First push – selects contrast function for
adjustment;
Contrast adjust mode – decreases contrast level;
OSD
menu – moves the cursor to the left or
decreases adjustment levels
(#2 right): Multifunction;
First push – selects contrast function for adjustment;
Contrast adjust mode – increases contrast level;
OSD
menu – moves the cursor to the right or
increases adjustment levels
A (#3): Selects the video input A to be displayed
B (#4): Selects the video input B to be displayed
Y/C (#5): Selects the video input Y/C (S-video) to be
displayed
SEQ (#6): Selects all three video inputs A, B, &
Y/C (S-video) to be displayed in sequence. Displaying
duration is set using the
OSD menu (Dwell Time).
NOTE: All video inputs selected for sequence mode
must be connected prior to applying power to the
monitor.
(#7): Press this switch to turn the monitor ON (the
indicator will illuminate). Press the switch again to
turn the monitor OFF.
5.2 On-screen Display (OSD) Menu
Press [ OSD] (Figure 1, Item 1) to obtain the following
menu options:
Tint : Adjusts color level; for best results, adjust until
skin color is natural. See the OSD Tint menu
configuration below.
NOTE: Applicable to NTSC only; not available in
PAL format.
Color : Adjusts the overall color intensity of the screen
display. See the OSD Color menu configuration below.
Default : Enables factory default settings for
Brightness, Contrast, Tint, Color, Volume, and Sharpness .
See the OSD Default menu configuration below.
▲
▲
▲
▲