EN
| 8
Bosch Security Systems | June 24, 2005
LTC 2020/91 Series |
Instruction Manual
|
Introduction
1.0
INTRODUCTION
1.1
Parts List
1.2
Monitor
The LTC 2020/91 20-inch (viewable picture area
51 cm) is intended for display of EIA or CCIR scan
system. The monitor accepts two (2) composite video
inputs with loop-through BNC connection on the rear
of the monitor. For applications that require audio, four
(4) audio RCA connectors are also provided.
1.3
Monitor Features
•
Possible use as a closed circuit television
monitor, or as a video preview/playback monitor
•
Loop-through connection - Video IN and OUT
•
Electrical circuits provide safeguards against
interference, noise, and changing signal strengths
to maintain a clear, stable picture
•
Manual-termination BNC connector
•
Detachable power cord
•
Video 1 and Video 2 inputs
•
Two (2) audio inputs/outputs with volume
control
•
Switchable scanning size on front panel (over
scan & under scan)
•
Switchable DC restoration
•
Automatic scan system selectable (CCIR/EIA)
•
Universal power (90 to 264 VAC)
2.0
SERVICE
If the unit ever needs repair service, the customer
should contact the nearest Bosch Security Systems, Inc.
Service Center for return authorization and shipping
instructions.
Service Centers
USA
Phone:
800-366-2283 or 717-735-6638
fax:
800-366-1329 or 717-735-6639
CCTV Spare Parts
Phone:
800-894-5215 or 408-956-3853 or 3854
fax:
408-957-3198
e-mail:
Canada
Phone:
514-738-2434
Europe, Middle East & Asia Pacific Region
Phone:
32-1-440-0711
For additional information, see
www.boschsecuritysystems.com.
3.0
INSTALLATION
Read these instructions carefully.
The monitor can be connected using the loop-through
feature.
When the monitor is connected to additional monitors,
the same picture can be obtained on all connected
monitors.
3.1
Ventilation
To prevent overheating, ensure that the ventilation
openings in the monitor cabinet are not covered.
3.2
Connection - Mains Supply
Model
Rated
Voltage
Power at
Sync
No.
Voltage
Range
Rated Format
Voltage
LTC 2020/91
120-230 VAC
90 to 264
45 W
CCIR/
50/60 Hz
EIA
The LTC 2020/91 monitor is delivered with a 2 pole
Euro cord and a 3-pole US cord.
3.3
Connections
The monitor can be connected in series by using the
Video IN and Video OUT connectors.
Qty
Item
1
20-inch CRT monitor
2
Two (2) power cords: 3-wire with grounded plug,
1.8 m (6 ft) long; one (1) with European continental plug
type and one (1) with U.S. plug type
1
This installation manual
