Bosch KIF20 Series, Руководство пользователя

Страница: 24 / 86

en
24
Connecting
the appliance
After installing the appliance, wait at least
1 hour until the appliance is switched on.
During transportation the oil in the
compressor may have flowed into
the refrigeration system.
Before switching on the appliance for
the first time, clean the interior of the
appliance (see chapter “Cleaning
the appliance”).
Electrical connection
The socket must be near the appliance
and also freely accessible following
installation of the appliance.
The appliance complies with the
protection class I. Connect the appliance
to 220–240 V/50 Hz alternating current
via a correctly installed socket with
protective conductor. The socket must
be fused with a 10 to 16 A fuse.
For appliances operated in
non-European countries, check whether
the stated voltage and current type
match the values of your mains supply
match the values of the mains supply.
This information can be found on
the rating plate. Fig. .
ã=
Warning
Never connect the appliance to
electronic energy saver plugs.
Our appliances can be used with mains
and sine-controlled inverters. Mains-
controlled inverters are used for
photovoltaic systems which are
connected directly to the national grid.
Sine-controlled inverters must be used
for isolated applications (e.g. on ships or
in mountain lodges) which are not
connected directly to the national grid.
Getting to know your
appliance
Please fold out the illustrated last page.
These operating instructions refer
to several models.
The features of the models may vary.
The diagrams may differ.
Fig.
1
* Not all models.
1-4 Controls
5 Light switch
6 Light
7 Glass shelf in the refrigerator
compartment
8 “Cool-fresh” container
9 Humidity filter
10 Humidity container
11 Egg rack
12 Butter and cheese compartment *
13 Shelf for tubes and small tins
14 Shelf for large bottles
A Refrigerator compartment
B Cool-fresh compartment