en
Operating the appliance
18
1
Operating the appliance
Operating the appliance
Switching on the appliance
1.
Insert mains plug in a socket.
The temperature, refrigerator compartment, cool-
fresh compartment and freezer compartment
displays illuminate.
2.
Wait until the
activate display
display illuminates.
The appliance begins to cool.
3.
Switch button lock off.
4.
Adjust the required temperatures in the refrigerator
compartment, cool-fresh compartment and freezer
compartment.
"Setting the temperature" on page 18
Operating tips
■
After the appliance has been switched on, it may
take several hours until the set temperatures have
been reached. Do not put in any food until the
selected temperature has been reached.
■
The fully automatic NoFrost system ensures that the
appliance remains free of frost. Defrosting is not
required.
■
The sides of the housing are heated slightly in
certain areas. This prevents condensation
in the area of the door seal.
Switching off and disconnecting the
appliance
Switching off the appliance
■
Pull out the mains plug or switch off the fuse.
Shutting down the appliance
If you do not use the appliance for a prolonged period:
1.
Pull out the mains plug or switch off the fuse.
The appliance no longer cools.
2.
Clean the appliance.
3.
Leave the appliance open.
Switching button lock off
If the appliance is not operated for several seconds, the
button lock switches on. The
activate display
display
illuminates.Switch off the button lock in order to use the
appliance again:
1.
Touch control or open the appliance.
The temperature displays light up and
unlock
button
flashes.
2.
Press
unlock
button and hold down until the light
bar completely illuminates.
The button lock is switched off.
Setting the temperature unit
You can choose between the units °C and °F:
1.
Press
menu
button.
2.
Press
Y
/
X
menu button until
°C/°F
display lights
up.
3.
Press
Y
/
X
freezer compartment button until the
freezer compartment temperature display shows
°C
or
°F
.
4.
Press
menu
button.
The setting is saved.
Setting the temperature
Recommended temperature
Refrigerator compartment
■
Keep pressing the button
Y
/
X
until the display
indicates the required temperature.
Cool-fresh compartment
■
Keep pressing the
Y
/
X
button until the display
indicates the desired temperature.
Freezer compartment
■
Keep pressing the button
Y
/
X
until the display
indicates the required temperature.
Setting humidity
You can set the humidity in the cool-fresh containers
separately:
1.
Press any button on the cool-fresh compartment
controls or open the cool-fresh compartment drawer.
2.
Press
unlock
button and keep pressed until the light
bar completely illuminates.
3.
Press
low humidity
or
high humidity
buttons to set
the desired humidity.
4.
Close the cool-fresh compartment drawer.
The setting is saved.
Note:
If the cool-fresh compartment temperature is set
below 0 °C (32 °F), the button lock for the controls of
the cool-fresh compartment is switched on and
low humidity
set.
The
¾
display illuminates.
Refrigerator compartment:
+4 °C (40 °F)
Cool-fresh compartment:
0 °C (32 °F)
Freezer compartment:
–18 °C (0 °F)
