Bosch ISW-BDL1-W11PGX, Справочное руководство системы

Страница: 32 / 58

32 en | wLSN Devices wLSN
F01U138553 | 01 | 2010.05 System Reference Guide Bosch Security Systems, Inc.
Figure 5.11 Adjusting the wLSN Inertia Detector
Figure 5.12 Routing the Wiring in the wLSN Inertia Detector
5.7.1 Sensitivity Settings
All sensitivity settings are programmed at the control panel
(refer to your control panel’s documentation for more
information).
The sensor element has two types of detection:
– Gross Attack
– Minor Attack
Gross Attack is always enabled. Minor Attack is very sensitive
and can be disabled.
Callout Description
1 Remove the sensor element
.
2 Turn the sensor element as needed
.
3 Ensure that the arrow on the sensor element points up
.
1 2
3
90
NOTICE!
Route the wiring from the sensor element so it does not make
contact with the tamper spring. Refer to Figure 5.12 .