Bosch IndraControl PR21, Руководство по эксплуатации

Страница: 14 / 36

8.2 FCC
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference
that may cause undesired operation.
8.3 CE marking
8.3.1 Declaration of conformity
The electronic products described in these instructions comply with the require-
ments and the target of the following EU directive and the following harmonized
European standards:
EMC directive 2014/30/EC
The electronic products described in the present instructions are intended for
use in industrial environments and comply with the following requirements:
Standard Title
DIN EN 61000-6-2 Electromagnetic compatibility (EMC)
Part 6-2: Generic standards – Immunity for industrial environments
DIN EN 61000-6-4 Electromagnetic compatibility (EMC)
Part 6-4: Generic standards – Emission standard for industrial environ-
ments
Tab. 8-2: Standards for electromagnetic compatibility (EMC)
Loss of CE conformity due to modifications at the device
CE marking applies only to the device upon delivery. After modifying
the device, verify the CE conformity.
8.4 UL/CSA certified
The devices are certified acc. to
●
UL 60950-1 (Information Technology Equipment)
●
CAN/CSA C22.2 No. 60950-1-07
UL file E499751
However, there can be combinations or extension stages with a limited or miss-
ing certification. Thus, verify the registration according to the UL marking on the
device.
8/29
Standards IndraControl PR21 Embedded Automa-
tion Computer
Bosch Rexroth AG R911389662_Edition 02