21
Installation and connection
This appliance is intended for domestic use only.
Place the tabletop appliance on a firm, level surface (at least
85 cm above the floor). The ventilation slots at the rear, top and
bottom of the appliance must not be obstructed. The minimum
height of the free space above the surface of the appliance is
30 cm.
The appliance is fitted with a plug and must only be connected
to a properly-installed earthed socket. The fuse protection must
be rated at 10 amperes (L or B circuit breakers). The mains
voltage must correspond to the voltage specified on the rating
plate.
The socket must be installed and the power cable replaced by
a qualified electrician only. The appliance plug must always be
accessible.
Do not use multiple plugs, power strips or extension leads.
Overloading results in a risk of fire.
The control panel
Here, you will see an overview of the control panel. Depending
on the appliance model, there may be differences in the
particular details.
Rotary selector
The rotary selector is used to alter the default values and set
values.
The rotary selector is retractable. Press on the rotary selector to
lock it in or out.
6WRS
6WDUW
0HPRU\EXWWRQ
'LVSOD\
IRUFORFNDQGFRRNLQJWLPH
6WDUWEXWWRQ
%XWWRQVIRUWKH
PLFURZDYHSRZHUVHWWLQJV
ZDWWV
ZDWWV
ZDWWV
ZDWWV
ZDWWV
'RRURSHQHU
5RWDU\VHOHFWRU
IRUDGMXVWLQJWKHFORFN
DQGFRRNLQJWLPH
RUIRUVHWWLQJWKH
DXWRPDWLFSURJUDPPHV
%XWWRQVIRUDXWRPDWLF
SURJUDPPHV
J
SURJUDPPHEXWWRQ
ZHLJKWEXWWRQ
6WRSEXWWRQ
&ORFNEXWWRQ
PLQ
NJ
J
L
*ULOOEXWWRQ
