background image

10

Bosch

®

 Support

Before Calling Service

See the Use and Care Manual for troubleshooting 

information. Refer to the “Statement of Limited Product 

Warranty” in the Use and Care Manual.
To reach a service representative, see the contact 

information at the front of the manual or in the following 

section. Please be prepared with the information printed 

on your product data plate prior to calling.

Data Plate

The data plate shows the model and serial number. Refer 

to the data plate on the appliance when requesting 

service.
The data plate can be found on the inside of the 

appliance door.

To avoid having to search for each piece of information 

when calling, you can enter the four items needed in the 

spaces provided below. 

Keep your invoice or escrow papers for warranty 

validation if service is needed.

Service

We realize that you have made a considerable 

investment in your kitchen. We are dedicated to 

supporting you and your appliance so that you have 

many years of creative cooking. 
Please don’t hesitate to contact our Customer Support 

Department if you have any questions or in the unlikely 

event that your Bosch® appliance needs service. Our 

service team is ready to assist you.

USA

800-944-2904
www.bosch-home.com/us/support

Canada

800-944-2904
www.bosch-home.ca/en/support

Parts and Accessories

Parts, filters, descalers, stainless steel cleaners and more 

can be purchased in the Bosch

®

 eShop or by phone.

USA

www.bosch-home.com/us/store

Canada

Marcone 800-482-6022
or
Reliable Parts 800-941-9217

Model No.
FD-No.
Date of Purchase
Customer Service 

O

Содержание HMC80152UC












Отзывы: