English 21
Sabbath Mode
The Sabbath mode enables those of particular faiths to use
their ovens on the Sabbath.
The Sabbath mode can be entered in a Bake mode only.
The bake temperature must be within the Sabbath mode
temperature range of 100° to 450° F.
If the oven light is on during setup, it remains on throughout
the Sabbath mode operation. If the oven light is off during
setup, it remains off throughout the Sabbath mode
operation.
To set the Sabbath Mode:
No kitchen timers or oven timers may be running when
Sabbath mode is entered.
1. Begin a Bake operation. While
Bake
is running, press
and hold the
Oven Timer
touchpad for five seconds.
If a timer is running when Sabbath mode attempts to
start, the display blinks the message: “SABBATH NOT
AVAILABLE”.
If no timers are running, the Sabbath mode settings
appear in the display. The Sabbath Mode timer blinks
showing the value can be edited. The default value is
74:00 (the maximum number of hours for which
Sabbath Mode can be set.)
2. Press
Enter
to accept the default 74:00 hours and start
Sabbath Mode. Or use the numeric keypad to enter the
desired Sabbath mode timer value. Timer values
between 0:01 and 74:00 can be entered.
Note:
If no changes are made within 10 seconds,
Sabbath Mode auto starts.
3. Once Sabbath mode has begun, the display changes
to show the message “SABBATH ON”.
4. After the Sabbath mode countdown reaches zero, the
oven displays the current time and the message
“SABBATH”. No user input is accepted in this state. To
end the Sabbath Mode and return to normal function,
press the
Oven Clear/Off
touchpad.
Note:
•
The temperature in Sabbath Mode is 100° F to 450° F.
•
The Sabbath Mode timer can be set between 0:01 and
74 hours.
To edit the Sabbath Temperature:
While editing the temperature in Sabbath mode, there is no
feedback from the control. If an invalid temperature is set,
the oven will default back to the previous running
temperature.
1. Press the Bake touchpad.
2. Enter the new desired set temperature.
3. Press Enter.
The oven will adjust its set temperature after a randomized
delay.
Panel Lock
Allows the user to disable all buttons on the control panel.
Panel Lock can only be enabled in stand by mode
1. To enable Panel Lock, press and hold the
Panel Lock
touchpad for 3 seconds (in stand by mode).
2. To disable Panel Lock, press and hold the
Panel Lock
touchpad for 3 seconds. The display returns to stand
by mode.