Bosch HGA243255M, Инструкция по эксплуатации

Страница: 15 / 24

15
:
Caution!
The ignition device should not be actuated for more than 15
seconds. If the burner does not light within 15 seconds, wait for
at least one minute. Then repeat the ignition process.
Caution!
The gas grill only works when the protecting plate is inserted.
Make sure that the protecting plate is correctly inserted.
Setting the timer
You can use the timer as a kitchen timer. It runs independently
of the oven. The timer has a special signal. This means that you
can tell whether the timer or cooking time has expired.
Setting procedure
1.
Press the
0
Clock button.
The
S
timer symbol flashes.
2.
Use the + or - button to set the timer time.
+ button / default value = 10 minutes
- button / default value = 5 minutes
The timer starts after a few seconds. The
S
symbol appears in
the display. The elapsed time is shown.
The time has elapsed
A signal sounds. Press the
0
Clock button. The timer display
goes out.
Changing the timer duration
Press the Clock button. Use the + or - button to change the
time.
Cancelling the setting
Press the
0
Clock button. Press the - button repeatedly until a
zero appears in the display.
The timer and cooking time count down at the same time
The symbols light up. You can see the timer time counting
down in the display.
To query the
x
remaining time:
Press the
0
button.
The queried value appears in the display for a few seconds.
Care and cleaning
With attentive care and cleaning, your hob and oven will retain
its looks and remain in good working order for a long time. We
will explain here how you should care for and clean them
correctly.
Notes
■
Slight differences in the colours on the front of the oven are
caused by the use of different materials, such as glass,
plastic and metal.
■
Shadows on the door panel which look like streaks, are
caused by reflections made by the oven light.
■
Enamel is baked on at very high temperatures. This can
cause some slight colour variations. This is normal and does
not affect operation. The edges of thin trays cannot be
completely enamelled. As a result, these edges can be
rough. This will not impair the anti-corrosion protection.
Cleaning agents
Damage to the various different surfaces caused by using the
wrong cleaning agent can be avoided by observing the
following instructions.
When cleaning the hob do not use
■
undiluted washing-up liquid or dishwasher detergent,
■
scouring pads,
■
abrasive cleaning agents such as oven cleaner or stain
remover,
■
high-pressure cleaners or steam jets.
■
Do not clean individual parts in the dishwasher.
When cleaning the oven do not use
■
sharp or abrasive cleaning agents,
■
cleaning agent with a high alcohol content,
■
scouring pads,
■
high-pressure cleaners or steam jets.
■
Do not clean individual parts in the dishwasher.
Wash new sponges thoroughly before first use.
Zone Cleaning agent
Stainless steel sur-
faces*
(depending on
appliance model)
Hot soapy water:
Clean with a dish cloth and dry with a
soft cloth. On stainless steel surfaces,
always wipe parallel to the natural grain.
Otherwise, you may scratch the surface.
Remove patches and splashes of limes-
cale, grease, starch and albumin (e.g.
egg white) immediately. Corrosion can
form under such patches and splashes.
Special care products suitable for hot
stainless steel surfaces are available
from our after-sales service and from
specialist retailers. Apply a thin layer of
care product with a soft cloth.
Enamel, painted,
plastic and screen-
printed surfaces*
(depending on
appliance model)
Hot soapy water:
Clean with a dish cloth and dry with a
soft cloth. Do not use glass cleaner or
glass scrapers for cleaning.
Control panel Hot soapy water:
Clean with a dish cloth and dry with a
soft cloth. Do not use glass cleaner or
glass scrapers for cleaning.
Upper glass cover*
(depending on
appliance model)
Glass cleaner:
Clean with a soft cloth.
You can remove the upper glass cover
for cleaning. To find out how to do this,
please refer to the section Upper glass
cover .
Rotary knobs
Do not remove.
Hot soapy water:
Clean with a dish cloth and dry with a
soft cloth.
* Optional (available for some appliances, depending on the
appliance model)