en
Trouble shooting
26
3
Trouble shooting
Trouble shooting
If a fault occurs, there is often a simple explanation.
Before calling the after-sales service, please refer to the
fault table and attempt to correct the fault yourself.
Fault table
If a dish does not turn out as well as you had hoped,
refer to the chapter:
Tested for you in our cooking studio.
It
contains useful tips and information on cooking, baking
and roasting.
:
Warning – Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be
carried out by one of our trained after-sales engineers.
Replacing the bulb in the oven ceiling light
If the bulb in the oven light fails, it must be replaced.
Heat-resistant, 25 watt spare bulbs can be obtained
from our after-sales service or a specialist retailer. Only
use these bulbs.
:
Warning – Risk of electric shock!
Switch off the circuit breaker in the fuse box.
1.
Place a tea towel in the cold oven to prevent
damage.
2.
Unscrew the glass cover by turning it anti-clockwise.
3.
Replace the bulb with one of the same type.
4.
Screw the glass cover back in.
5.
Remove the tea towel and switch on the circuit
breaker.
Glass cover
You must replace a damaged glass cover. Suitable
glass covers may be obtained from the after-sales
service. Please specify the E number and FD number of
your appliance.
Fault
Possible cause Troubleshooting/information
The oven does
not work.
Faulty circuit
breaker
Look in the fuse box and check
that the circuit breaker is in
working order.
Power cut.
Check whether the kitchen light
or other kitchen appliances are
working.
Oven not hot.
Dust on the con-
tacts.
Turn the control knobs clock-
wise and anti-clockwise a few
times.
The burner does
not ignite.
Power cut or
damp ignition
plugs.
Light the gas burner with a gas
lighter or a match.
The gas grill does
not work.
The protecting
plate is incor-
rectly inserted.
Make sure that the protecting
plate is correctly inserted.
Remove the protecting plate
and reinsert it.
