background image

en 

Top cover

24

14.6 Additional door safety

Additional safety devices have been fitted to prevent
contact with the oven doors. Always attach these safety
devices when children could come near the oven. You
can purchase this special accessory from after-sales
service. 11023590

WARNING ‒ Risk of burns!

During long cooking times, the oven door may become
very hot.

Supervise small children when the oven is in opera-
tion.

15  Top cover

For cleaning, remove the top cover.

15.1 Removing the upper cover

WARNING ‒ Risk of injury!

A scratched upper glass cover may break and frag-
ment.

Do not use a glass scraper or any harsh or abrasive
cleaning products.

Requirement:

 Before opening the top cover, remove

any spills with a cloth.

1.

Take hold of the sides of the cover with both hands
and pull the cover upwards.

2.

Use a glass cleaner for cleaning.

Note: 

If the cover hinges become loose, note the let-

ters marked on them.
The hinge with the letter R must be fitted on the right,
and the hinge with the letter L must be fitted on the left.

15.2 Installing the top cover

After cleaning, install the top cover following the
same procedure in reverse order.

Note: 

Only close the top cover once the hotplates have

cooled down.

16  Troubleshooting

You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.

WARNING ‒ Risk of injury!

Improper repairs are dangerous.

Repairs to the appliance should only be carried out
by trained specialist staff.

If the appliance is defective, call Customer Service.

WARNING ‒ Risk of electric shock!

Incorrect repairs are dangerous.

Repairs to the appliance should only be carried out
by trained specialist staff.

Only use genuine spare parts when repairing the
appliance.

If the power cord of this appliance is damaged, it
must be replaced by the manufacturer, the manufac-
turer's Customer Service or a similarly qualified per-
son in order to prevent any risk.

16.1 Malfunctions

Fault

Cause and troubleshooting

The appliance is not
working.

The mains plug of the power cord is not plugged in.

Connect the appliance to the power supply.

The circuit breaker is faulty.

Check the circuit breaker in the fuse box.

Содержание HGA120E50Z









































Отзывы: