Page. 5
4. Measure 1½'' (38 mm) from top edge of warming
drawer and make mark on both sides of cabinet.
5. Install the
Left
and
Right
Side Cabinet Brackets
flush
to the cabinet face with two (2) ¾'' Phillips head wood
screws per side. Install side trim mounting bracket so
that the bottom edge of the bracket is aligned with
the pencil mark.
6. Secure the
Left Side Mounting Bracket
to the
Left
Side Warming Drawer Clearance Bracket
using three
(3) x
½
'' T-20 Torx head screws.
7. Secure the two (2)
Warming Drawer Clearance
Brackets
to the top of the installed warming drawer
using the outer holes with six (6) ½'' T-20 Torx head
screws.
8. Secure the
Left Side Mounting Bracket
to the
Left
Cabinet Mounting Bracket
using one (1) ½'' T-20 Torx
screw.
9. Secure the two (2)
Transformer Support Brackets
to
the
Warming Drawer Clearance Brackets
with four
(4) ½'' T-20 Torx head screws.
1½" (38)
1½" (38)
dia. 1/16"
1
