Bosch HBN331E0B, Инструкция по эксплуатации

Страница: 8 / 20

8
4.
Use the + or - button to set the cooking time.
+ button / default value = 30 minutes
- button / default value = 10 minutes
The cooking time has elapsed
A signal sounds. The oven switches off. Press the 0 button
twice and switch off the function selector.
Changing the setting
Press the
0
Clock button. Use the + or - button to change the
cooking time.
Cancelling the setting
Press the 0 Clock button. Press the - button until zero is
shown on the display. Switch off the function selector.
Setting the cooking time if the clock is hidden
Press the 0 Clock button twice and make your settings as
described in point 4.
The oven should switch on and off
automatically
Do not allow food to stand for too long in the oven. Meat and
fish spoils easily if not kept chilled.
Example in the picture: 3D hot air
:
, 200 °C. It is 10:45. The
meal takes 45 minutes to cook and should be ready at 12:45 .
1.
Use the function selector to select the required type of
heating.
2.
Use the temperature selector to set the temperature or the
grill setting.
3.
Press the 0 clock button.
The x Cooking time symbol flashes.
4.
Use the + or - button to set the cooking time.
5.
Press the
0
Clock button repeatedly until the
y
End time
symbol flashes.
You can see in the display when the meal will be ready.
6.
Use the + button to set a later end time.
The setting is adopted after a few seconds.
The display shows the end time until the oven starts
operating.
The cooking time has elapsed
A signal sounds. The oven switches off. Press the 0 button
twice and switch off the function selector.
Note: You can make changes as long as the symbol is
flashing. When the symbol lights up, the setting has been
adopted.
Setting the clock
When the appliance is connected for the first time or after a
power cut, the
0
symbol and three zeros flash in the display.
Set the clock. The function selector must be switched off.
Setting procedure
1.
Press the 0 Clock button.
12.00 appears in the display and the 0 symbol flashes.
2.
Use the + or - button to change the clock.
After a few seconds, the time is saved. The 0 symbol goes
out.
Changing from summer to winter time, for example
Press the
0
Clock button twice and change the time using the
+ or - button.
Setting the timer
You can use the timer as a kitchen timer. It runs independently
of the oven. The timer has a special signal. This means that you
can tell whether the timer duration or the cooking time has
elapsed. You can also set the timer if the childproof lock is
active.
Setting procedure
1.
Press the S Timer button.
The
S
symbol flashes.
2.
Use the - or + button to change the timer duration.
Default value for + button = 10 minutes
Default value for - button = 5 minutes
NJ
PLQ
K
NJ
PLQ
K
NJ
PLQ
K