Bosch HBF113BR0A, Инструкция по эксплуатации

Страница: 14 / 32

en
Time-setting options
14
Setting the end time
You can delay the time at which cooking is due to
finish. You can, for example, put your food in the
cooking compartment in the morning and set the
cooking time so that it is ready at lunch time.
Notes
■
Make sure that food is not left in the cooking
compartment for too long as it may spoil.
■
Do not adjust the end time once the appliance is
already in operation. Otherwise the cooking result
may no longer be satisfactory.
The end of the cooking time can be delayed by up to
23 hours and 59 minutes.
Example in the picture: The time is 10.30 a.m., a
cooking time of 45 minutes has been set and you want
the food to be ready at 12.30 p.m.
1.
Set the type of heating and temperature or setting.
2.
Touch the
v
button twice and use the
A
or
@
button
to set the cooking time.
3.
Touch the
v
button again.
The end time
y
will be highlighted on the display.
4.
Use the
@
or
A
button to delay the end time.
The appliance will apply the settings after a few
seconds. The end time will be shown on the display.
Once the appliance starts, the time will begin counting
down.
The cooking time has elapsed
An audible signal will sound. The appliance will stop
heating. The cooking time will be zero on the display.
Once the signal stops, you can touch the
@
button to
set a new cooking time.
Once your food is cooked, turn the function selector to
the "Off" position to switch the appliance off.
Changing and cancelling
You can use the
A
or
@
button to change the end time.
After a few seconds, the change will be applied. The
end time cannot be changed once the cooking time has
already started to count down. Otherwise the cooking
result would no longer be satisfactory.
To cancel, use the
A
button to set the end time all the
way back to the current time plus the cooking time. The
appliance will start to heat and the cooking time will
start to count down.
Setting the timer
You can use the timer whether or not the appliance
itself is in use. However, it is not possible to set a
cooking time or end time.
The maximum time that can be set is 23 hours and 59
minutes. Up to 10 minutes, the timer duration can be
set in 30-second increments. Above 10 minutes, the
time increments become longer the higher the value.
The timer duration will start at a different default value,
depending on which button you touch first:
5 minutes if you touch the
A
button and 10 minutes if
you touch the
@
button.
1.
Touch the
v
button until the timer symbol
Q
is
highlighted.
2.
Use the
A
or
@
button to set the timer duration.
After a few seconds, the timer duration will start to
count down.
Tip:
If the set timer duration is the duration for which
you wish to cook your food, use the cooking time. The
appliance will then switch off automatically when it has
finished cooking.
The timer duration has elapsed
An audible signal will sound. The timer duration will be
zero on the display.
Touch any button to switch off the timer.
Changing and cancelling
You can use the
A
or
@
button to change the timer
duration at any time. After a few seconds, the change
will be applied.
To cancel, use the
A
button to reset the timer duration
all the way to zero. The timer is now switched off.
Setting the time
Once the appliance has been connected to the mains
or following a power failure, the clock will flash on the
display. Set the time.
The function selector must be set to the "Off" position.
1.
Use the
A
or
@
button to set the time.
The time will stop flashing.
2.
Confirm by pressing the
v
button.
The appliance will apply the time you have set.