Bosch HBC24D533W, Инструкция по эксплуатации

Страница: 8 / 24

8
Switching off the appliance
:
Risk of scalding!
Hot steam may escape when the appliance door is opened.
Open the appliance door carefully during or after cooking.
When opening the door, do not lean over it. Ensure that,
depending on the temperature, steam is not visible.
Press and hold the
n
button to end cooking.
When the cooking time has elapsed, the cooking operation is
ended automatically. A signal sounds. Press the
0
button to
stop the signal.
To switch off the appliance, turn the operating mode and
temperature selectors back to the
Û
position.
The cooling fan may continue to run when you open the
appliance door.
After each use
Emptying the water tank.
1.
Open the appliance door carefully.
Hot steam will escape.
2.
Remove and clean the water tank.
3.
Thoroughly dry the seal in the tank cover and the tank recess
in the appliance.
Caution!
Do not dry the water tank in the hot cooking compartment. This
will damage the water tank.
Drying the cooking compartment
:
Risk of scalding!
The water in the evaporator dish may still be hot. Allow it to cool
before wiping.
1.
Leave the appliance door ajar until the appliance has cooled
down.
2.
Once it has cooled down, wipe out the cooking compartment
and the evaporator dish with the enclosed cleaning sponge
and dry well with a soft cloth.
3.
Remove food residues in the cooking compartment as soon
as the appliance has cooled down.
4.
Wipe units and handles dry where condensation has formed.
Time-setting options
Your appliance has many different time-setting options. You can
use the
0
button to access the menu and switch between the
individual options.
All the time symbols are lit during the time when you can make
settings. The [ ] brackets show you which time-setting function
you have currently selected.
A time-setting function which has already been set can be
changed directly with the
@
or
A
button, when its time symbol
is in brackets.
Checking the time-setting option
Press the
0
button repeatedly until the brackets are around
the appropriate symbol. The display shows the value for a few
seconds.
Setting the timer
You can use the timer as a kitchen timer. It runs independently
of the cooking operation. The timer has its own signal. In this
way, you can tell whether it is the timer or a cooking time which
has elapsed.
1.
Press the
0
button.
The time symbols in the display light up, the brackets are
around
U
.
2.
Use the
@
or
A
button to set the timer.
Default value for the
@
button = 10 minutes
Default value for the
A
button = 5 minutes
After a few seconds, the timer duration set is adopted. The
timer starts. The [ U ] symbol for the timer appears, and the
time starts counting down.
Changing the timer duration
Use the @ or A button to change the timer duration. After a few
seconds, the change is adopted.
Once the timer duration has elapsed
An audible signal sounds.
‹‹
:
‹‹
appears in the display.
Switch the timer off with the
0
button.
Cancelling the timer duration
Use the
A
button to set the timer duration to
‹‹
:
‹‹
. After a
few seconds, the change is adopted.
Setting the cooking time
The cooking time sets how long your dish will be cooked for.
When the cooking time has elapsed, the cooking operation is
ended automatically.
Example in the picture:
Cooking time of 45 minutes.
Prerequisite:
An operating mode and temperature have been set.
1.
Press
0
repeatedly until the brackets are around the
r
Cooking time.
The time symbols light up.
‹‹
:
‹‹
appears in the display.