Bosch HBA58T6.0A, Инструкция по эксплуатации

Страница: 12 / 40

12
Setting a later end time
Please remember that easily spoiled foods must not be allowed
to remain in the cooking compartment for too long.
A later end time can be set for
■
all types of heating and all dishes from the recommended
settings
■
a variety of programmes
■
and the cleaning system
Example: you put the dish in the cooking compartment at 9.30.
It takes 45 minutes to cook and will be ready at 10.15, but you
would like it to be ready at 12.45 instead.
Change the end time from 10.15 to 12.45. The oven goes into
standby. Cooking starts at 12.00 and finishes at 12.45.
Setting a later end time
Prerequisite: The selected operation has not already begun and
a cooking time has been set. The
0
time-setting options menu
is open.
1.
Switch to "End" by turning the rotary selector. The end time of
the operation is displayed in the second line.
2.
Press the
X
button.
3.
Set a later end time by turning the rotary selector.
4.
Press the
0
button to close the time-setting options menu.
5.
Confirm by pressing the
n
button.
The setting is adopted. The oven is in 0 ... standby. The end
time is displayed in the status bar. Operation starts at the
appropriate time. The cooking time counts down in the status
bar.
The cooking time has elapsed
A signal sounds. The oven stops heating. The status bar shows
the cooking time as 00:00:00. You can cancel the signal early
by pressing the
0
button.
Correcting the end time
This is possible, providing the oven is on standby. Press the 0
button to open the menu. Use the rotary selector to switch to
end time, press the X button and adjust the end time by
turning the rotary selector. Press the 0 button to close the
menu.
Cancelling the end time
This is possible, providing the oven is on standby. Press the
0
button to open the menu. Switch to end time by turning the
rotary selector, press the
X
button and shift the end time back
using the rotary selector until the display goes out. Press the
0
button to close the menu.
Setting the clock
The oven must be switched off before you can set or change
the clock.
Following a power cut
The "Set clock" heading appears in the display following a
power cut.
1.
Press the X button and turn the rotary selector to set the
current time.
2.
Press the 0 button.
The time is applied.
Changing the clock
Example: changing from summer to winter time.
1.
Press the
0
button.
The time-setting options menu appears.
2.
Switch to the clock by turning the rotary selector.
3.
Press the
X
button and turn the rotary selector to change
the time.
4.
Press the
0
button.
The time-setting options menu closes. The time is changed.
Hiding the clock
The current time appears in the display when the oven is
switched off. You can hide the clock. For more information,
refer to the Basic settings section.
Memory
You can save the settings for a dish in the memory and call it
up again at any time.
The memory is useful for if you frequently prepare a specific
dish.
Saving settings in the memory
You cannot save the cleaning system.
1.
Specify the type of heating, temperature and, if required, a
cooking time for the dish you wish to cook. Do not start. If
you want to save a programme: Select the programme and
enter the weight. Do not start.
2.
Press and hold the
f
button until "Memory saved" is
displayed.
The saved setting is shown in the display and can be started at
any time.
Saving another setting
Enter and save the new setting. The old settings are
overwritten.
([LWZLWK
(QG
7LPHVHWWLQJRSWLRQV
([LWZLWK
(QG
7LPHVHWWLQJRSWLRQV
7LPHVHWWLQJRSWLRQV
7RSERWWRPKHDWLQJ
ƒ&