en
Childproof lock
14
11 Childproof lock
You can secure your appliance to prevent children
from accidentally switching it on or changing the set-
tings.
Notes
¡
You can go to the basic settings →
to
specify whether you want the option to set the child-
proof lock.
¡
After a power cut, the childproof lock is deactivated.
11.1 Activating and deactivating the
childproof lock
Requirement:
The function selector must be set to the
"Off" position .
▶
To activate the childproof lock, press and hold the
button until appears in the display.
‒
To deactivate the childproof lock, press and hold
the button until goes out in the display.
12 Basic settings
You can configure the basic settings for your appliance to meet your needs.
12.1 Overview of the basic settings
Here you can find an overview of the basic settings and factory settings. The basic settings depend on the features
of your appliance.
Display
Basic setting
Selection
Time display
= hide the time
= display the time
1
Signal duration upon completion of a cook-
ing time or timer period
= 10 seconds
= 30 seconds
1
= 2 minutes
Button tone when pressing a button
= off
= on
1
Cooling fan run-on time
= short
= medium
= long
1
= extra long
Waiting time until a setting is applied
= 3 seconds
1
= 6 seconds
= 10 seconds
Childproof lock can be adjusted
= no
= yes
1
Water hardness
2
= softened
= soft (up to 1.5 mmol/l)
= medium (1.5–2.5 mmol/l)
= hard (2.5–3.8 mmol/l)
= very hard (above 3.8 mmol/l)
1
1
Factory setting (may vary according to model)
2
Only for appliance types with steam function
12.2 Changing basic settings
Requirement:
The appliance is switched off.
1.
Press and hold the button for approximately
four seconds.
a
The first basic setting appears in the display,
e.g. .
2.
Use the or button to change the setting.
3.
Use the button to switch to the next basic setting.
4.
To save the changes, press and hold the button
for approx. four seconds.
Note:
Following a power failure, the factory basic set-
tings are restored.
12.3 Discarding changes to the basic
settings
▶
Turn the function selector.
a
All changes are discarded and not saved.
