10/44
Safety instructions
Bosch Rexroth AG
, Type HAD...-1X/ and HAD...-2X/, RE 50150-B/10.20
2 Safety instructions
2.1 General information on this chapter
The diaphragm type accumulator HAD..1X and HAD...-2X/ was manufactured
according to the generally accepted code of practice. However, there is still the
danger of personal injury and damage to property if you do not observe this
chapter and the safety instructions in this documentation.
▶
Read this documentation completely and thoroughly before working with the
diaphragm type accumulator HAD...-1X/ and HAD...-2X/.
▶
Keep this documentation in a location where it is accessible to all users at all
times.
▶
Always include the required documentation when you pass the diaphragm
type accumulator HAD...-1X/ and HAD...-2X/ on to third parties.
2.2 Intended use
Diaphragm type accumulators are hydraulic components intended for the installation
into hydraulic drive systems for the purposes of energy storage, shock and vibration
absorption, and leakage oil or volume compensation.
Diaphragm type accumulators are pressure equipment in the sense of the
Pressure Equipment Directive 2014/68/EU.
The diaphragm type accumulator HAD...-1X/ and HAD...-2X/ is exclusively intended
for integration into a machine or system or to be assembled with other components
to form a machine or system.
During project planning, the basic principles of the Pressure Equipment Directive
and the Machinery Directive are to be observed for the intended use of the
diaphragm type accumulator within the EU. For the intended use outside the EU,
the regulations valid in your country must be observed.
The diaphragm type accumulator may only be commissioned if it has been integrated
into the machine/system for which it is intended and after it was confirmed that
the machine/system complies with the provisions of the Machinery Directive,
the Pressure Equipment Directive and other locally applicable provisions.
Imperatively observe the technical data, operating conditions and limits of
performance specified in data sheet 50150.
The diaphragm type accumulator is a technical equipment and not intended for
private use.
Intended use also includes having read and understood these operating
instructions completely, especially the chapters 2 "Safety instructions" and 3
"General information on damage to property and damage to the product".
