Bosch GV550 TT, Руководство по ремонту

Страница: 23 / 35

9001630797 Page 23 of 35
4.9 Replace the detergent dispenser cover
A small screwdriver can be used as a levering tool.
Prerequisite:
Appliance is disconnected from the mains.
Appliance is disconnected from water supply.
Door has been opened.
Detergent cover has been opened.
4.9.1 Remove the detergent cover
•
Slide the detergent cover inwards 5 mm.
•
Use a lever to remove the detergent cover from the underside
of the guide rails and remove the detergent cover from the
upper side of the guide rails.
•
Remove the spring.
4.9.2 Insert the spring
•
Insert the long end of the spring into the mounting hole of the
dispenser device (1).
•
Insert the short edge of the spring into the mounting hole of the
detergent cover (2).
•
Press the cover onto the dispenser (3).
4.9.3 Install the detergent cover
•
Insert the detergent cover into the guide rails on one side, to 5
mm before the fully open position. Gently applying force, press
the opposite side of the guide rails.
•
Check the operation of the detergent cover.