Bosch GTB 18V-45 Professional, Оригинальное руководство пользователя

Страница: 14 / 109

14 | English
u
Only use the battery with products from the manufac-
turer.
This is the only way in which you can protect the
battery against dangerous overload.
Protect the power tool against heat, e.g.
against continuous intense sunlight, fire,
water, and moisture.
There is a risk of explo-
sion.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture.
There is a risk of explosion and
short-circuiting.
u
Connect the power tool to a mains supply that is prop-
erly connected to earth.
The socket and extension cable
must have a fully functioning protective conductor.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Read all the safety and
general instructions.
Fail-
ure to observe the safety
and general instructions
may result in electric shock,
fire and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for driving and loosening screws.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Screwdriver bit
(2) Stop sleeve
(3) Adjusting sleeve for retractable depth stop
(4) Retractable depth stop
(5) Rotational direction switch
(6) Lock-on button for on/off switch
(7) Rechargeable battery
a)
(8) Battery release button
(9) PowerSAVE on/off button
(10) LED to illuminate screwing location
(11) PowerSAVE LED indicator
(12) On/off switch
(13) Handle (insulated gripping surface)
(14) Universal bit holder
(15) Belt clip
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Cordless screwdriver GTB 18V-45
Article number 3 601 JK7 0..
Rated voltage V= 18
No-load speed
A)
min
-1
0–4500
Max. torque, soft screwdriv-
ing application according to
ISO 5393
A)
Nm 6.0
Tool holder ¼" internal
hexagon
Max. screw diameter mm 6
Weight according to
EPTA-Procedure 01:2014
B)
kg 1,3 – 2,3
Recommended ambient tem-
perature during charging °C 0 to +35
Permitted ambient temperat-
ure during operation
C)
and
during storage
°C –20 to +50
Recommended rechargeable
batteries GBA 18V...
ProCORE18V...
Recommended chargers GAL 18...
GAX 18..
GAL 36...
A) Measured at 20–25 °C with rechargeable battery ProCORE18V
4.0Ah .
B) Measured with GBA 18V 1.5Ah and ProCORE18V 12.0Ah .
C) Limited performance at temperatures < 0 °C
Noise/vibration information
Noise emission values determined according to
EN 62841-2-2 .
Typically, the A-weighted noise level of the power tool is:
Sound pressure level
76 dB(A); sound power level
87 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN 62841-2-2 :
1 609 92A 7PU | (25.05.2022) Bosch Power Tools