English |
11
Power tool use and care
u
Do not force the power tool. Use the correct power
tool for your application.
The correct power tool will do
the job better and safer at the rate for which it was de-
signed.
u
Do not use the power tool if the switch does not turn it
on and off.
Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
u
Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools.
Such preventive safety measures reduce the risk
of starting the power tool accidentally.
u
Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool.
Power
tools are dangerous in the hands of untrained users.
u
Maintain power tools. Check for misalignment or bind-
ing of moving parts, breakage of parts and any other
condition that may affect the power tool’s operation.
If damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power
tools.
u
Keep cutting tools sharp and clean.
Properly main-
tained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
u
Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into ac-
count the working conditions and the work to be per-
formed.
Use of the power tool for operations different
from those intended could result in a hazardous situation.
Service
u
Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This
will ensure that the safety of the power tool is maintained.
Hammer Safety Warnings
u
Wear ear protectors.
Exposure to noise can cause hear-
ing loss.
u
Use auxiliary handle(s), if supplied with the tool.
Loss
of control can cause personal injury.
u
Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory
may contact hidden wiring or its own cord.
Cutting ac-
cessory contacting a "live" wire may make exposed metal
parts of the power tool "live" and could give the operator
an electric shock.
u
Use suitable detectors to determine if utility lines are
hidden in the work area or call the local utility com-
pany for assistance.
Contact with electric lines can lead
to fire and electric shock. Damaging a gas line can lead to
explosion. Penetrating a water line causes property dam-
age or may cause an electric shock.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
u
Hold the power tool firmly with both hands and make
sure you have a stable footing.
The power tool can be
more securely guided with both hands.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for heavy chiselling and demoli-
tion work as well as for driving in and compacting with the
appropriate accessories.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
Handle (insulated gripping surface)
(2)
On/off switch
(3)
Carrying handle
(4)
Knurled nut with carrying handle
(5)
Lock bolt (GSH 16-30)
(6)
Tool retainer (GSH 16-28)
(7)
Tool shank
(8)
Tool holder
(9)
Shoulder
Technical data
Demolition Ham-
mer
GSH 16-28
GSH 16-30
Article number
3 611 C35 0.. 3 611 C35 1..
Rated power input
W
1750
1750
Impact rate
min
-1
1 300
1 300
Impact energy per
stroke according to
EPTA-Procedure
05/2009
J
41
41
Tool holder
mm
28
30
Weight according
to
kg
18.3
16.9
Bosch Power Tools
1 609 92A 2BF | (01.02.2019)
