English - 1
Measured values determined according to
2000/14/EC (1.60 m height, 1 m distance away)
and EN 50 144.
Typically the A-weighted noise levels of the prod-
uct are: sound pressure level: 88 dB (A); sound
power level: 101 dB (A).
Wear hearing protection!
The typical weighted acceleration is 14 m/s
2
.
The machine is intended for chiselling work in
concrete, brick, stone and asphalt as well as for
driving and compacting with appropriate acces-
sories.
1 Dust protection cap
2 Locking sleeve
3 Chisel adjusting ring (Vario-lock)
4 On/Off switch
5 Impact rate control
6 Service indicator
7 Auxiliary handle
Not all of the accessories illustrated or described are
included as standard delivery.
Working safely with this ma-
chine is possible only when the
operating and safety information
are read completely and the in-
structions contained therein are
strictly followed. Before using
for the first time, ask for a practi-
cal demonstration. In addition,
the general safety notes in the
enclosed booklet must be ob-
served.
■
Wear hearing protection.
■
Wear safety glasses, protective gloves and
sturdy shoes.
■
If the mains cable is damaged or cut through
while working, do not touch the cable but im-
mediately pull the mains plug. Never use the
machine with a damaged cable.
■
Connect machines that are used in the open
via a residual current device (RCD) with an ac-
tuating current of 30 mA maximum. Use only
extension cables that are approved for outdoor
use.
■
Use appropriate detectors to determine if
utility lines are hidden in the work area or
call the local utility company for assistance.
Contact with electric lines can lead to fire and
electric shock. Damaging a gas line can lead to
explosion. Penetrating a water line causes
property damage or may cause an electric
shock.
■
Hold the power tool only by the insulated
gripping surfaces, when performing an op-
eration where the cutting tool may run into
hidden wiring or its own cord.
Contact with a “live” wire will make exposed
metal parts of the tool “live” and shock the op-
erator.
■
Always direct the cable to the rear away from
the machine.
■
Insert the mains plug only when the machine is
switched off.
■
Use the machine only with the auxiliary han-
dle 7.
■
When working with the machine, always hold it
firmly with both hands and provide for a secure
stance.
■
Always switch the machine off and wait until it
has come to a standstill before placing it down.
■
Never allow children to use the machine.
■
Bosch is only able to ensure perfect operation
of the machine if the original accessories in-
tended for it are used.
Tool Specifications
Demolition Hammer
GSH 11 E
Order number
0 611 316 7..
Rated power
[W]
1 500
Impact rate
[bpm] 900 – 1 890
Impact energy per
stroke
[J]
6 – 25
Chisel positions
12
Chiselling performance
in concrete of medium
hardness
[cm
3
/
min]
2 700
Tool holder
SDS-max
Lubrication
Permanent
central
lubrication
Weight (without
accessories) approx.
[kg]
10.1
Protection class
/ II
Please observe the order number of your machine.
The trade names of the individual machines may vary.
Noise/Vibration Information
Intended Use
Machine Elements
For Your Safety
8 • 1 619 929 581 • TMS • 15.04.02
