Bosch GSB 14,4-2-LI Plus, Оригинальное руководство пользователя

Страница: 15 / 240

English | 15
u
The battery can be damaged by pointed objects such
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
u
Only use the battery with products from the manufac-
turer.
This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture.
There is a risk of explosion and
short-circuiting.
u
Switch the power tool off immediately if the applica-
tion tool becomes blocked. Be prepared for high
torque reactions which cause kickback.
The applica-
tion tool becomes blocked when it becomes jammed in
the workpiece or when the power tool becomes over-
loaded.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for driving and loosening screws
and for drilling in wood, metal, ceramic and plastic. The GSB
is also designed for impact drilling in brick, masonry and
stone.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Tool holder
(2) Keyless chuck
(3) Torque presetting ring
(4) Mode selector switch (GSB)
(5) Gear selector switch
(6) Belt clip
(7) Battery
A)
(8) Battery release button
A)
(9) Worklight
(10) Rotational direction switch
(11) On/off switch
(12) Bit holder
A)
(13) Handle (insulated gripping surface)
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Cordless drill/driver
Combination cordless drill GSR 14,4-2-LI Plus GSR 18-2-LI Plus GSB 14,4-2-LI Plus GSB 18-2-LI Plus
Article number 3 601 JE6 0.. 3 601 JE6 1.. 3 601 JE7 0.. 3 601 JE7 1..
Rated voltage V 14.4 18 14.4 18
No-load speed
A)
– First gear min
-1
0–500 0–500 0–500 0–500
– Second gear min
-1
0–1900 0–1900 0–1900 0–1900
Impact rate
A)
min
-1
– – 0–28,500 0–28,500
Max. torque, hard/soft screw-
driving application according to
ISO 5393
A)
Nm 59/21 63/24 59/21 63/24
Max. drilling diameter
– Masonry mm – – 13 13
– Steel mm 13 13 13 13
– Wood mm 35 38 35 38
Chuck capacity mm 1.5–13 1.5–13 1.5–13 1.5–13
Screw diameter max mm 7 8 7 8
Weight according to
EPTA-Procedure 01:2014
A)
kg 1.4–1.7 1.6–2.7 1.5–1.7 1.6–2.7
Recommended ambient tem-
perature during charging °C 0 to +35 0 to +35 0 to +35 0 to +35
Bosch Power Tools 1 609 92A 583 | (13.12.2019)