u
Do not open the battery.
There is a risk of short-circuit-
ing.
u
The battery can be damaged by pointed objects such
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
u
Only use the battery with products from the manufac-
turer.
This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g.
against continuous intense sunlight, fire,
water, and moisture.
There is a risk of explo-
sion.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for sawing and cutting wood-
based materials, plastic, plasterboard, non-ferrous metals
and mounting elements (e.g. non-hardened nails, clamps). It
is also suitable for working on soft wall tiles and for dry sand-
ing and scraping of small areas. It is ideal for working close to
edges and flush with surfaces. The power tool must only be
operated using Bosch accessories.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
On/off switch
(2)
Ventilation slots
(3)
Battery
A)
(4)
Orbital stroke rate preselection thumbwheel
(5)
Battery charge indicator
A)
(6)
Button for battery charge indicator
A)
(7)
SDS lever for unlocking tools
(8)
Tool holder
(9)
Worklight
(10)
Battery release button
(11)
Clamping lever for depth stop
A)
(12)
Depth stop
A)
(13)
Plunge cut saw blade
A)
(14)
Handle (insulated gripping surface)
(15)
Dust extraction system
A)
(16)
Sanding plate
A)
(17)
Sanding sheet
A)
(18)
Clamping lever for dust extraction system
A)
(19)
Dust extraction outlet
A)
(20)
Dust extraction adapter
A)
(21)
Dust extraction hose
A)
A)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical data
Cordless multi-cutter
GOP 18V-28
Article number
3 601 HB6 1..
Rated voltage
V =
18
No-load speed n
0
min
–1
8000–20000
Oscillation angle on left/right
°
1.4
Weight according to
EPTA-Procedure 01:2014
kg
1.8
Permitted ambient temperature
– during charging
°C
0 to +45
– during operation
A)
and dur-
ing storage
°C
−20 to +50
Recommended batteries
GBA 18V…
GBA 18V…W
GBA 18V…MW
Recommended chargers
GAL 18…W
GAL 18V-..
GAX 18V-30
AL 1820 CV
AL 1860 CV
GAL 1880 CV
GAL 3680 CV
A)
Limited performance at temperatures <0 °C
Technical data determined using the battery that comes with the
product.
Noise/vibration information
Noise emission values determined according to
EN 62841‑2‑4
.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level
84
dB(A); sound power level
95
dB(A). Uncertainty K=
3
dB.
Wear hearing protection
Total vibration values a
h
(triax vector sum) and uncertainty K
determined according to
EN 62841‑2‑4
:
Sanding: a
h
=
3.5
m/s
2
, K=
1.5
m/s
2
,
Cutting with plunge cut saw blade: a
h
=
8
m/s
2
, K=
1.5
m/s
2
,
Cutting with segmential saw blade: a
h
=
5.5
m/s
2
,
K=
1.5
m/s
2
,
Scraping: a
h
=
8.5
m/s
2
, K=
1.5
m/s
2
.
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure detailed in EN 62841
and may be used to compare power tools. They may also be
English |
17
Bosch Power Tools
1 609 92A 4DA | (08.10.2018)
