English |
25
Bosch Power Tools
2 609 141 206 | (14.8.14)
Operation
Initial Operation
Do not leave the switched-on measuring tool unattended and switch the mea-
suring tool off after use.
Other persons could be blinded by the laser beam.
Protect the measuring tool against moisture and direct sun light.
Do not subject the measuring tool to extreme temperatures or variations in
temperature.
As an example, do not leave it in vehicles for a long time. In case of
large variations in temperature, allow the measuring tool to adjust to the ambient
temperature before putting it into operation. In case of extreme temperatures or
variations in temperature, the accuracy of the measuring tool can be impaired.
Avoid heavy impact to or falling down of the measuring tool.
After severe exte-
rior effects to the measuring tool, it is recommended to carry out an accuracy
check (see “Accuracy Check of the Distance Measurement”, page 31) each time
before continuing to work.
Switching On and Off
– To
switch on
the measuring tool and the laser, briefly press the measuring button
2
[
].
– To
switch on
the measuring tool without the laser, briefly press the On/Off button
5
[
].
Do not point the laser beam at persons or animals and do not look into the la-
ser beam yourself, not even from a large distance.
To
switch off
the measuring tool, press and hold the On/Off button
5
[
].
The values in the memory are retained when you switch the tool off.
Measuring Procedure (see figure A)
Once switched on, the measuring tool is in the length measurement function. You can
set other measuring functions by repeatedly pressing button
4
[
Func
] (see “Measur-
ing Functions”, page 26).
The rear edge of the measuring tool is always the reference level for the measure-
ment.
Place the measuring tool against the desired starting point of the measurement (e.g.
a wall).
Note:
If the measuring tool has been switched on using the On/Off button
5
[
],
briefly press the measuring button
2
[
] to switch the laser on.
OBJ_BUCH-2264-001.book Page 25 Thursday, August 14, 2014 4:14 PM
Содержание GLM 40
Страница 3: ...2 609 141 206 14 8 14 Bosch Power Tools 3 GLM 40 e h d d d f g f a b c 10 9 8 7 12 5 4 3 2 1 11 6 ...
Страница 4: ...2 609 141 206 14 8 14 Bosch Power Tools 4 B A A A A A 1 245 m 2 1 X 1 245 m GLM 40 ...
Страница 5: ...5 2 609 141 206 14 8 14 Bosch Power Tools 1 608 M00 05B 13 2 607 001 391 14 ...