Assembly
-8-
Model number GHO12V-08
Voltage rating 10.8V /12V
max
No load speed n
0
14,500/min
Maximum Capacities
Planing depth . . . . .0 - 0.04" (0 - 1.0mm)
Max. planing depth .0.04" - 0.08" (1.0 - 2.0mm)
Rabbeting depth . . .0 - 0.67" (0 - 17mm)
Cutting width . . . . . .2.2" (56mm)
NOTE:
For tool specifications refer to the nameplate on your tool.
Battery Packs/Chargers
Use this tool with Bosch recommended batteries only.
Use of any other
batteries may create a risk of injury and fire.
Please refer to the Charger Manual included with your tool for Bosch recommended battery
packs.
Specifications
INSERTING AND RELEASING
BATTERY PACK
Release battery pack from tool by pressing on
both sides of the battery release tabs
6
and
pull the battery
5
out (Fig. 2).
If battery release tabs are
cracked or otherwise
damaged, do not insert into tool.
Battery can
fall out during operation.
Ensure the switch is in
the off position before
inserting battery pack.
Inserting the battery
pack into power tools that have the switch on
invites accidents.
To insert battery, align battery and slide
battery pack into tool until it locks into position.
Do not force.
For best performance we recommend using
batteries with a capacity of at least 2.5 Ah.
PLANER BLADES
The planer blades are
sharp and fragile and
must be handled carefully to avoid injury to
the user or damage to the blades.
Use only Bosch PA1208
planer blades.
Using other
planer blades may cause injuries.
The PA1208 planer blades have two cutting
edges, and may be reversed when one of the
cutting edges becomes dull or chipped.
Do not attempt to sharpen or use resharpened
used blades of any kind. Use only blades
designated for use with this model, because
other blades will cause vibration, decrease
perfomance and may not clamp securely in
blade holder.
BLADE AND WRENCH STORAGE AREA
When the battery pack
5
has been removed
from the tool, there is a blade wrench
17
that is
conveniently located inside the handle, where it
is always handy and unlikely to get lost or
misplaced (Fig. 2).
A spare blade can be stored in the blade drawer
7
(Fig. 2)
Disconnect battery pack from tool before making any assembly,
adjustments or changing accessories
. Such preventive safety measures
reduce the risk of starting the tool accidentally.
17
6
5
7
B
A
C
FIG. 2
20
19
18
17
13
16
8
A
B
D
C
FIG. 3
160992A3WD_GHO12V-08 10/16/17 2:57 PM Page 8
