English– 8
1 609 929 F67 • (04.10) PS
31
Locking screw for the slide rails
32
Scale for the bevel angle (vertical)
33
Angle indicator (vertical) for the left bevel angle
range
34
Setting knob for 33.9° bevel angle (vertical)
35
Multi purpose tool
36
Tightening knob for the length stop
37
37
Length stop
38
Sliding saw table extension
39
Clamping handle for the saw table extension
40
Scale for mitre angle (horizontal)
41
Knob for the setting of the bevel angle range (ver#
tical)
42
Spindle lock
43
Locking lever
**
44
Phillips screw (attachment of the swinging guard)
45
Phillips screw (attachment of the swinging guard)
46
Hex#head bolt for attaching the saw blade
47
Washer
48
Clamping flange
49
Tool spindle
50
Angle adapter for dust bag
51
Sawdust ejector
52
Clamping lever of the quick action clamp
53
Threaded rod of the quick action clamp
54
Holes for quick action clamp
55
Button for quick releasing the adjustment screw of
the depth stop
56
Depth stop
57
Screw for the length stop
37
58
Screws of the table insert
59
–
62
Adjustment bolts for the 0° basic setting (vertical
bevel angle)
63
Adjustment bolt for the 45° basic setting
(left vertical bevel angle)
64
Adjustment bolt for the clamping action of the
clamping handle
16
65
Adjustment bolts for the clamping action of the
clamp
5
66
Angle indicator (horizontal)
67
Adjustment screw of the fence extension
68
Hex#head bolts (14 mm) of the fence
0 601 B23 537 (Australia):
*
8
Button for unlocking the On/Off switch
27
**
The locking lever
43
is not included.
Perform the operations described in the following
accordingly without the locking lever
43
.
Not all the accessories illustrated or described are inB
cluded in standard delivery.
4
MOUNTING
Avoid unintentional starting of the electroB
tool. During mounting and for all work on
the electroBtool itself, the main plug must
not be connected to the power source.
Items Included
Before putting the electro#tool into operation, check
that all of the items listed below have been delivered:
–
Dual#bevel slide mitre saw with premounted saw
blade
–
Dust bag
1
–
Angle adapter
50
for dust bag
–
Locking knob
14
–
Open#end spanner
3
–
Allen key
2
–
Multi purpose tool
35
with h ex#socket spanner
(14 mm) and screwdriver bit (hex#head 4 mm and
Phillips)
–
Quick action clamp
23
Check the electroBtool for possible damage.
Before further use of the electro#tool, check that all the
protective devices are fully functional. Any lightly dam#
aged parts must be carefully checked to ensure flaw#
less operation of the tool. All parts must be properly
mounted and all conditions fulfilled that ensure fault#
less operation.
Damaged protective devices and parts must be imme#
diately replaced by an authorised service centre.
Initial Operation
Remove all parts supplied carefully from the packag#
ing.
Remove all packing material from the electro#tool and
the accessories provided.
45°-0
Содержание GCM 12 SD
