12
| English
1 609 92A 3F2 | (13.10.16)
Bosch Power Tools
If you are unable to resolve the problem using the troubleshooting guide then please contact your dealer in the first instance.
Maintenance and Service
Correct storage is essential for maintaining the life of the
product. If possible, avoid storage areas with high humidity
which could cause rust or corrosion.
End of season storage: Remove battery adapter from tool and
store machine and battery in a dry safe place away from direct
sunlight.
After-sales Service and Application Service
www.bosch-garden.com
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the type plate of
the garden product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: [email protected]
Machine runs
intermittently
On/Off switch defective
Have the power tool repaired by an approved dealer
Low battery capacity
Ensure battery is fully charged before use
The machine is overheated
Allow tool to cool and try again
Battery discharged
Recharge battery
Battery too hot/cold
Allow to cool/warm
Machine defective
Contact Service Agent
Machine fails to operate
Battery carrier defective
Contact Service Agent.
See battery carrier manual.
Battery adapter not fully inserted
Ensure battery adapter is inserted correctly
Garden tool is too hot
Allow tool to cool and try again
Trigger engaged when battery fitted
Release trigger and reapply.
Tube obstructed
Switch off the machine, remove battery and remove
material
Battery adapter contacts on machine
damaged/ obstructed
Clean contacts/Contact Service Agent
Machine does not blow
Tube obstructed
Remove battery adapter
Clear tube
Inlet guard obstructed
Remove battery adapter
Clear inlet guard
Excessive vibra-
tions/noise
Machine defective
Contact Service Agent
Run time per battery
charge too low
Battery dead or defective
Replace the battery
Tube cannot be mounted
on the machine
Incorrect assembly
see “assembly”
Blower tube is damaged/defective
Replace the tube
Problem
Possible Cause
Corrective Action
OBJ_BUCH-2692-003.book Page 12 Thursday, October 13, 2016 2:23 PM