Bosch FLEXIDOME IP panoramic 6000 IC, Руководство по установке

Страница: 26 / 40

The unit does
not report an
alarm. Alarm source is not
selected. Select possible alarm
sources on the Alarm
sources configuration
page.
No alarm response
specified. Specify the desired
alarm response on
the Alarm
connections
configuration page; if
necessary change the
IP address.
The unit is not
operational after
a firmware
upload.
Power failure during
programming by
firmware file. Have the unit
checked by Customer
Service and replace if
necessary.
Incorrect firmware
file. Enter the IP address
of the unit followed
by /main.htmin your
Web browser and
repeat the upload.
Web browser
contains empty
fields. Active proxy server in
network. Create a rule in the
local computer's
proxy settings to
exclude local IP
addresses.
26 en | Troubleshooting
FLEXIDOME IP
panoramic 6000/7000 IC
2016.08 | v1.0 | AM18-Q0707 Bosch Security Systems