6 720 643 259 (2010/05)
32
|
Menu settings INSTALLER SETTINGS (for installers only)
US/CA
8
Menu settings INSTALLER SETTINGS (for installers
only)
Moving through menu structure, programming,
deleting values and reverting to the default
setting are described in detail in section 5.2
starting on page 18.
8.1 INSTALLER SETTINGS menu
summary and settings
The tables set out below provide
•
an overview of the menu structure (column 1).
•
an overview of the factory settings (column 2),
e.g. for the purposes of resetting individual
menu options to the factory settings.
•
an overview of the adjustment ranges of the
individual menu options (column 3).
•
space for making a note of your personal
settings (column 4).
•
references to the detailed descriptions of the
individual menu options (column 5).
8.1.1 INSTALLER SETTINGS: System configuration
The
INSTALLER SETTINGS
menu is
intended only for installers.
B
To open
INSTALLER SETTINGS
:
press and hold
for approx.
3 seconds.
menu
The menu options are only shown if
the system components are present
and/or active. Some menu options
are not shown because they are
switched off by a setting for another
menu option.
B
Always set or skip menu options
in order. In that way, subsequent
menu options will be
automatically adjusted or not
shown.
Menu structure
System configuration
Default
setting
Control range
Personal
setting
Description
starts on page
Start automatic system
configuration
No
No | Yes
ID heating circuit
0
1 ... 10
Heating circuit configuration
Unmixed
without IPM
No | Unmixed without IPM |
Unmixed with IPM | Mixed
ISM
No
No | Present
