manualshive.com logo in svg

Bosch EXTEGRA IP 9000 FX, Руководство по эксплуатации

Поделиться
Скачать
Bosch EXTEGRA IP 9000 FX Скачать руководство пользователя страница 10

Default Profile name

Description

DSL Optimized

Ideal for encoding on a DSL uplink where bit rate limitations are
critical.

3G Optimized

Ideal for encoding on a 3G uplink where bit rate limitations are
critical.

Basic Mode: Audio

You can set the gain of the audio signals to suit your specific requirements. The current video
image is shown in the small window next to the slide controls to help you check the audio
source and improve assignments. Your changes are effective immediately.
If you connect via Web browser, you must select the option Transmit Audio on the LIVE
Functions page. (See LIVE Functions, page 15). For other connections, the transmission
depends on the audio settings of the respective system.
Audio
The audio signals are sent in a separate data stream parallel to the video data, and so increase
the network load. The audio data are encoded according to G.711 and require an additional
bandwidth of approx. 80 kbps per connection in each direction. If you do not want any audio
data to be transmitted/received, select Off.
Line In
You can set the line input gain using the slider. Values range from 0 to 31. The default value is
0.
Line Out
You can set the line output gain using the slider. Values range from 0 to 79. The default value
is 0.

Basic Mode: Recording

You can record the images from the camera on various local storage media or on an
appropriately configured iSCSI system.
Storage medium
1.

Select the required storage medium from the list.

2.

Click the Start button to start the recording immediately.

Basic Mode: System Overview

The data on this page are for information purposes only and cannot be changed. Keep a
record of this information in case technical assistance is required.

Notice!
You can select all required text on this page with the mouse and copy it to the clipboard with
the [Ctrl]+[C] key combination, for example if you want to send it via e-mail.

4.5

4.6

4.7

10

en | Configuration via IP, Basic Mode

EXTEGRA IP 9000 FX

2015.03 | 1.0 |

Operation Manual

Bosch Security Systems

Содержание EXTEGRA IP 9000 FX























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды