background image

2

en | 

EX7-IP

MAN7IPB Rev.0 | 2008.10 

Quick Install

Bosch Security Systems

- liquid has been spilled in or on the equipment;
- an object has fallen into the unit;
- unit has been dropped or the unit cabinet is damaged;
- unit exhibits a distinct change in performance;
- unit does not operate normally when the user correctly follows the 

operating instructions.

8.

Safety check - Safety checks should be performed upon completion of service 
or repairs to the unit to ensure proper operating condition.

9.

Installation - Install in accordance with the manufacturer's instructions and in 

accordance with applicable local codes. 

10.

Attachments, changes, or modifications - Only use attachments/accessories 
specified by the manufacturer. Any change or modification of the equipment, 
not expressly approved by Bosch, could void the warranty or, in the case of 
an authorization agreement, authority to operate the equipment.

i

o

DANGER! 

High risk: This symbol indicates an imminently hazardous 

situation such as " Dangerous Voltage " inside the product. If not 
avoided, this will result in an electrical shock, serious bodily injury, or 
death.

!

CAUTION! 

 Alerts the user to the risk of damage to the unit

!

WARNING! 

Medium risk: Indicates a potentially hazardous situation. 

If not avoided, this may result in minor or moderate injury. Alerts the 
user to important instructions accompanying the unit.

i

o

NOTE! 

This symbol indicates information or a company policy that 

relates directly or indirectly to the safety of personnel or protection of 
property.

Содержание EX7-IP















Отзывы: