8
Top Rack Accessories
Top Rack Flip Tines
flip tines fold down to make loading the racks easier in some instances. Grasp the tines,
release from notch, and fold the tines downward. When the top rack is loaded, push it into the
dishwasher.
NOTE
:
When pushing the top rack into the dishwasher, push it until it stops against the back of
the tub so the top rack spray arm will connect to the water supply. Do not push the top rack with
the door.
Top Rack Height Adjustment
the top rack can be lowered to accommodate large items in the top rack, and raised to make
room for large items in the bottom rack.
to raise the top rack:
1. pull the top rack out of the dishwasher until it stops rolling.
2. Grasp the top of the rack above the automatic Height-adjustable top rack handles and pull
it upward as shown in figure 4 until the automatic Height-adjustable top rack handles lock
the rack into position (you do not need to press the automatic Height-adjustable top rack
handles in order raise the rack).
NOTE:
Before you push the top rack back into the dishwasher, ensure that the rack height is the
same on both sides. otherwise, the dishwasher door will not shut and the top rack spray arm will
not connect to the water circuit.
to lower the top rack:
1. pull the top rack out of the dishwasher until it stops rolling.
2. press the automatic Height- adjustable top rack handles inward as shown in
figure 5 and let the rack drop.
Loading the Bottom Rack
place large items in the bottom rack. load pots, pans and bowls upside-down. figures 6 and 7
show typical mixed loads for the bottom rack.
Loading Extra Tall Items
if an item is too tall to be placed into the bottom rack even with the top rack in the raised
position, remove the empty top rack by pulling it out of the dishwasher until it stops rolling. pull
the front of the rack upward and outward until the rollers are completely free of the roller guides.
set the top rack aside. push the roller guides back into the dishwasher. insert the extra tall item
sprinkler into the top rack spray outlet and turn the sprinkler clockwise to lock it into position as
shown in figure 8. place your extra tall item(s) in the bottom rack as shown in figure 9.
NOTE:
Keep the vent on the tub’s right side clear by placing tall items such as plastic cutting
boards and tall baking sheets on the bottom rack’s left side, center, or back.
ATTENTION
To avoid dishwasher damage, do not reinstall the top rack without removing the extra tall
item sprinkler. Do not reinstall the top rack with the sprinkler installed.
to remove the sprinkler and return the dishwasher to its normal condition:
1.
turn the sprinkler counterclockwise and remove it.
2.
retrieve the top rack.
3.
tilt the top rack upwards and position the top rack rollers onto the roller guides.
4.
Continue pushing the top rack until the rollers are on the guide.
5.
push the top rack into the dishwasher.
Loading the Silverware Basket
NOTE
:
the silverware basket tops can be folded up to accommodate large or oddly-shaped items.
Figure 6
Figure 7
Figure 9
Do not block vent.
Figure 8
10 place setting bottom rack
12 place setting bottom rack
