Supervision and Expansion
Transmitter supervisory check-in and a transmitter
specific supervisory window, defined in the receiver,
support sites with both removable pendants and fixed-
position transmitters. The technology also supervises
repeaters.
Enroll, supervise, and map up to sixteen wireless
transmitters and repeaters using the appropriate
outputs. Configure transmitters and repeaters
individually to best suit the application.
Certifications and approvals
Inovonics Wireless Corporation holds the following approvals:
FCC
Conforms to FCC Part 15 regulations
Installation/configuration notes
Compatibility Information
The EN4216R LCD Receiver is compatible with the
following products:
Repeater
EN5040‑T
High‑power Repeater
Transmitters
EN1210
Universal Transmitter (Single‑input)
EN1210EOL
Universal Transmitter with EOL Resistor
EN1210SK
Survey Transmitter
EN1210W
Door-Window Transmitter with Reed Switch
EN1215EOL
Universal Transmitter with Wall Tamper and
EOL Resistor
EN1215WEOL
Door‑Window Transmitter with Wall Tamper,
Reed Switch, and EOL Resistor
EN1223D
Water-resistant Pendant Transmitter
(Double‑button)
EN1223S
Water-resistant Pendant Transmitter
(Single‑button)
EN1223SK
Survey Pendant Transmitter
EN1233D
Necklace Pendant Transmitter (Double‑button)
EN1233S
Necklace Pendant Transmitter (Single‑button)
EN1235D
Beltclip Pendant Transmitter (Double‑button)
EN1235S
Beltclip Pendant Transmitter (Single‑button)
EN1235DF
Fixed-location Transmitter (Double‑button)
EN1235SF
Fixed-location Transmitter (Double‑button)
EN1242
Smoke Detector-Transmitter
EN1247
Glass-break Sensor Transmitter
EN1249
Billtrap Transmitter
EN1260
PIR Motion Sensor‑Transmitter (Commercial
and High‑end Domestic Applications)
EN1261HT
PIR Motion Sensor‑Transmitter (High‑traffic
Areas)
EN1262
PIR Motion Sensor‑Transmitter (Residential and
Low‑traffic Commercial Applications)
EN1265
PIR Motion Sensor‑Transmitter (Ceiling‑mount
Applications)
Parts included
Quant.
Component
1
EN4216R Receiver
1
Hardware pack
1
Literature – Installation and Operation Manual
Technical specifications
Electrical
Power Requirements:
10 VDC to 14 VDC
Environmental
Relative Humidity:
Up to 90%, non‑condensing
Temperature (operating ):
0°C to +60°C (+32°F to +140°F)
Mechanical
Material:
ABS
Closure:
Latching with optional screws for high
security installations
Dimensions:
16.5 cm x 8.9 cm x 2.5 cm (6.5 in. x 3.5
in. x 1 in.)
Weight:
204 g (7.2 oz)
Outputs
Rating:
1 A, 28 VDC, or 0.5 A, 30 VAC (resistive)
Types:
• Six on‑board Form C relays for
connecting to any control panel
or for stand-alone wireless
applications (NO or NC)
• One NO Receiver case tamper
contact closure
• One NC Receiver jam input
indication
Reception Characteristics
Frequency Compatibility:
902 MHz to 928 MHz
Transmitters:
Supports up to 16
Trademarks
Trademark names are used throughout this document.
In most cases, these designations are claimed as
trademarks or registered trademarks in one or more
countries by their respective owners. Rather than
placing a trademark symbol in every occurrence of a
trademark name, Bosch Security Systems, Inc. uses
2 | EN4216R Wireless LCD Receiver
