579604 | REV. C | June 2020
Bosch Automotive Service Solutions Inc.
EV2000 Series Wallbox Charger Installation and Operation Manual| 11 | en
9.0 System Code
Alarm Code
Description
004001
System input voltage is higher than workable range ( > 305 volt)
004002
System input voltage is lower than workable range ( < 170 volt)
004003
System output voltage is higher than EV battery maximum voltage
004004
Request output current from EV is higher than present EVSE ability
004005
The temperature of air inlet or input contactor is higher than workable range ( > 60
degree C )
004006
The temperature of CCS combo charging plug is higher than workable range
REMA => ( > 85 degree C )
Phoenix => ( > 75 degree C )
004007
The air filter need to be replaced
004008
System fan is attenuated so that need to be replaced
004009
The self-test of system controller is failure
00400A
Emergency button is pressed
00400B
The user authorized by backend is failed
00400C
The user authorized by EVSE itself is failed
00400D
The temperature sensor of air inlet is broken
00400E
The temperature sensor of input contactor is broken
00400F
SPD trigger
004010
Output fuse at CCS side is broken
004011
Output fuse at CHAdeMO side is broken
004012
The temperature sensor of CCS combo charging plug is broken
004013
Yhe temperature of air inlet or input contactor is lower than workable range ( < - 40
degree C )
004014
User stops charging
004015
The plug-in times of CCS charging plug is more than 10000 times
004016
The plug-in times of CHAdeMO charging plug is more than 10000 times
004017
System is timeout if user doesn’t plug-in in 5 mnutes after authorized
004018
Charging time is up
004019
System data storage is not enough.
004021
Charging is remotely stopped by backend office
004022
Input voltage is drop
004023
System L1 input voltage is lower than workable range ( < 170 volt)
005001
Communication with CHAdeMO EV is broken
005005
Communication with CCS EV is broken
005006
Power rectifier is broken
005007
Communication with CCS controller is broken
005008
Communication with aux. power module is broken
005009
Communication with relay control module is broken
00500C
Communication with display module is broken
00500D
Communication with RFID module is broken
00500E
3G module is not ready (module itself or SIM)
00500F
WiFi module is not ready
006001
3G connection is disconnected from APN
