Bosch DWK98PR60 Скачать руководство пользователя страница 10

Страница: 10 / 24

Connecting to a hob

Connecting to a hob

Connectin

g to a ho

You can connect this appliance to a hob and then

control the functions of the hood via your hob.
Appliances can be connected to each other in different

ways:

Home Connect

Two appliances can be connected using the Home

Connect app provided that both of them are Home

Connect compatible.
Refer to the Home Connect documents supplied for

more information.

Connecting appliances directly

If the appliance is connected directly to a hob, it cannot

be connected to your home network as well. The

appliance works like an extractor hood that is not

connected to the network and you can continue to

operate it via the control panel.

Connecting appliances via your home network

If the appliances are connected to each other via your

home network, both the hood controls on the hob and

Home Connect can be used to operate the appliance.

Notes

■

Make sure you follow the safety instructions in the

instruction manual for your extractor hood and that

these are complied with even when operating the

appliance via the hood controls on the hob.

■

Using the controls on the extractor hood always

takes priority. It is not possible to use the hood

controls on the hob during this time.

Setting up a connection

The hood must be switched off before you can connect

the hob and extractor hood.

Connecting directly

Make sure that the hob is switched on and is in search

mode.
Refer to your hob's instruction manual for more

information.

Notes

■

If your extractor hood is connected directly to the

hob, it cannot be connected to your home network

as well and you will not be able to use Home

Connect.

■

The hob cannot be connected to your home

network. To break a connection, follow the

instructions in the section entitled "Resetting Home

Connect".

Press and hold the

symbol until it starts to flash.

Confirm the connection on the hob within the next

30 seconds.

The extractor hood has been connected to the hob

when the

stops flashing and remains continuously

lit.

Connecting via your home network

Follow the instructions in the section entitled "Automatic

your home network"

"Home Connect" on page 11

Once the extractor hood is connected to your home

network, you can connect to the hob via the Home

Connect app. To do this. follow the instructions on your

mobile device.

Содержание DWK98PR60

























Результаты поиска

Содержание DWK98PR60

Отзывы:

Похожие инструкции для DWK98PR60

Бренды по названию

Популярные бренды

Bosch DWK98PR60, Инструкция по установке и эксплуатации

Результаты поиска

Содержание DWK98PR60

Отзывы:

Похожие инструкции для DWK98PR60

Бренды по названию

Популярные бренды