Bosch Drive System, Руководство пользователя, Страница: 13 / 33

English– 13
Bosch eBike Systems 0 276 001 USPen | (1.9.14)
Speed and Distance Indicator
The speed indicator f always displays the current speed.
The following functions are available in the function indica-
tor (combination of text indicator d and value indicator e ):
– “Range”: Estimated range of the available battery pack
charge (for constant conditions such as assistance level,
route profile, etc.)
– “Distance”: Distance covered since the last reset
– “Trip time”: Trip time since the last reset
– “Avg. Speed”: Average speed achieved since the last
reset
– “Max. Speed”: Maximum speed achieved since the last
reset
– “Clock”: Current time
– “odometer”: Display of the total distance traveled with
the eBike (cannot be reset)
To switch between the indication functions , press the “i”
button 1 on the on-board computer or the “i” button 11 on
the operating unit until the desired function is displayed.
To
reset “Distance” , “Trip time” and “Avg. Speed” ,
switch to any of the three functions and then press and hold
the “RESET” button 6 until the indicator is set to zero. This
also resets the values for the other two functions.
To
reset the “Max. Speed” , switch to this function and
then press and hold the “RESET” button 6 until the indica-
tor is set to zero.
To
reset “Range” , switch to this function and then press
the “RESET” 6 button until the display is reset to the value
of the factory setting.
When the on-board computer is removed from the holder
4 , all function values remain stored and can be viewed.
Displaying/Adapting Basic Settings
The basic settings can be displayed and changed no matter
if the on-board computer is in the holder 4 or not.
To access the basic settings menu, press and hold the
“RESET” button 6 and the “i” button 1 until “Configura-
tion” is displayed in text indicator d .
To switch between the basic settings , press the “i” but-
ton 1 on the on-board computer until the desired basic set-
ting is displayed. When the on-board computer is inserted
in holder 4 , you can also press the “i” button 11 on the op-
erating unit.
To
change the basic settings , press the On/Off button 5
next to the “–” indicator to decrease the value or scroll
down, or the light button 2 next to the “+” indicator to in-
crease the value or scroll up.
When the on-board computer is inserted in holder 4 , you
can also change the values with the “–” button 12 or the
“+” button 13 on the operating unit.
To exit the function and store a changed setting, press the
“RESET” button 6 for 3 s.
The following basic settings are available:
– “clock”: The current time can be set here. Pressing and
holding the setting buttons fast-forwards the setting
speed.
– “wheel circum.” : You can change this value pre-set by
the manufacturer by ±5 %. This value is displayed only
when the on-board computer is in the holder.
– “English”: The language for the text indicator can be
changed. The available languages are German, English,
French, Spanish, Italian, Dutch and Danish.
– “unit km/mi”: The speed and distance can be displayed
either in kilometers or miles.
– “time format”: The time can be displayed either in a
12-hour or 24-hour format.
– “Shift recom. on/off”: You can switch the indication of
a shift recommendation on and off.
– “power-on hours”: Indicates the total travel time with
the eBike (can not be changed).
– “Displ. vx.x.x.x”: This is the software version of the dis-
play.
– “DU vx.x.x.x”: This is the software version of the drive
unit.This value is displayed only when the on-board
computer is in the holder.
– “Bat vx.x.x.x”: This is the software version of the bat-
tery pack.This value is displayed only when the on-
board computer is in the holder.
Error Code Indicator
The components of the eBike system are continuously and
automatically monitored. When an error is detected, the re-
spective error code is indicated in text indicator d .
To return to the standard indicator, press any button on the
on-board computer 3 or on the operating unit 10 .
Depending on the type of error, the drive unit is automati-
cally shut off, if required. Continued travel without assis-
tance from the drive unit is possible at any time. However,
have the eBike checked before attempting new trips.
f
WARNING: Have all checks and repairs performed
only by an authorized Bosch eBike dealer.