The status LED (2) shows the status of the door/
window contact using flashing codes.
Status LED
Device status
Recommended action
Flashes orange
Tuning mode
(is active) or device
is communicating with
the controller
Please wait
Flashes green
Tuning mode
(successful) or
transfer successful /
process confirmed
Flashes red
Tuning mode
(not successful) or
process failed
If this is the first tuning attempt, please try
again. Otherwise reset the device to the factory
settings and contact the service department if
necessary.
Flashes orange
after the button is
pressed twice
Break function is active
Open and close door/window 1x to end the
status or wait until the device ends the status
itself.
Continuously
flashes red
(every 15 s)
Fault detected
(e. g. battery status,
wireless connection)
Follow the instructions in the app (message
centre).
