Bosch DKS968D, Руководство по эксплуатации и установке

Страница: 8 / 21

6
Turn on the fan: Press the “Fan Power ” for the first
time. Then the fan runs at the maximum speed 3. The
right display screen displays 3.
Turn off the fan: Press the “Fan Power ” again. Then
the fan is off. If the delay function is on, it will be shut off
also.
The shutoff delay function is only used when the fan is
working.
Example: The cooker hood will be automatically
turned off after 3 minutes.
1. Press the "Fan Power " button, the fan starts working.
2. Press the "Delay " button for the first time to enter a
system recommended 5 minutes shutoff delay state. “
" is displayed and the number "5" flashing on the screen.
3. Continuously press the "Delay " button till the number
"3" is displayed on the screen. Note: the maximum
delay time is "9" minutes.
4. After setting successfully, the display screen displays
the remaining time and starts counting down. Repeat
the above steps to change the set time.
Cancel the shutoff delay function, repeat the above
steps to adjust the delay time to "0". The shutoff delay
function is canceled if no adjustment is made within 3
seconds.
The function for your cooker to control you cooker hood
is implemented through the mapping code for the
cooker hood and the cooker. Working condition of the
linkage function: The distance between the cooker and
the cooker hood cannot exceed 5 meters. One cooker
can be linked to only one cooker hood.
When you use the mapping code for the first time:
Power on the cooker and the cooker hood. Press the
button on the cooker hood for 3 seconds, indicating
that it is waiting for the mapping code. After the codes
are mapped, the buzzer of you cooker hood sounds,
the on the cooker hood displays 2 seconds. Then,
the linkage function is enabled.
Operating Instruction
Delay function set
Turn on and off the fan
Cooker-Hood Linkage
Function set