Bosch DIVAR IP 3000 DIP-3040-00N, Руководство по установке, Страница: 13 / 20

DIVAR IP 3000 System setup - first steps | en 13
Bosch Sicherheitssystem GmbH Installation Manual 2014.11 | V5 | DOC
4. In the Country or region , Time and currency and Keyboard layout lists, click the
appropriate item, then click Next .
The Microsoft Software License Terms and the EULA (End User License Agreement) are
displayed.
5. Accept the license terms, then click Start . Windows restarts.
After restart is finished, different Bosch VMS versions are displayed on the screen.
6. Double-click the Bosch VMS version you want to install.
Note. We recommend that you install the latest version.
The installation can take several minutes. Do not turn off the computer. If necessary,
restart the system.
7. After restart is finished, press CTR+ALT+DELETE. The Windows logon page is displayed.
8. Enter the default password WSS4Bosch .
9. After entering the password, a message is displayed that you must change the password
before logging on the first time. To confirm, click
OK .
10. Change the password.
A series of scripts perform important setup tasks. This can take several minutes. Do not
turn off the computer.
The Bosch VMS default screen is displayed.
Note: In case of password loss a system recovery must be performed as described in the
installation manual. The configuration must be done from scratch or must be imported.
11. On the Bosch VMS default screen, double-click the Bosch VMS Wizard icon to start
the Configuration Wizard.
The
Welcome page is displayed.
12. Configure the system using the Configuration Wizard.
Notice!
To perform administrative tasks, the BVRAdmin account can be entered when Bosch VMS
default screen is displayed. To do so, press CTRL+ALT+DEL, then hold down SHIFT while
clicking the
Switch User option and keep SHIFT pressed for about five seconds.
Notice!
We strongly recommend not changing any operating system settings. Changing operating
system settings can result in malfunctioning of the system.
See also:
– Using Bosch VMS Config Wizard, page 13
– Adding additional licenses, page 14
– Recovering the unit, page 18
4.4 Using Bosch VMS Config Wizard
Intended use for Config Wizard is the quick and easy configuration of a smaller system. Config
Wizard helps you to achieve a configured system including VRM, iSCSI system, cameras,
recording profiles and user groups.
User groups and their permissions are configured automatically. You can add or remove users
and set passwords.
Config Wizard can access Management Server only on the local computer.
You can save an activated configuration for backup purposes and import this configuration
later. You can change this imported configuration after import.
Config Wizard adds the local VRM automatically.