Bosch DIVAR DIP-6080-00N, Быстрое руководство по установке

Страница: 12 / 26

Rack mounting instructions
This section provides information on installing the chassis into a rack unit. There are a variety
of rack units on the market, which may mean the assembly procedure will differ slightly. You
should also refer to the installation instructions that came with the rack unit you are using.
Notice!
This rail will fit a rack between 26" and 33.5" deep.
Separating the sections of the rack rails
The chassis package includes two rail assemblies in the rack mounting kit. Each assembly
consists of two sections:
–
an inner fixed chassis rail that secures directly to the chassis
– an outer fixed rack rail that secures directly to the rack itself.
To separate the inner and outer rails:
1.
Locate the rail assembly in the chassis packaging.
2. Extend the rail assembly by pulling it outward.
3. Press the quick-release tab.
3.4
3.4.1
12 en | System setup - hardware DIVAR IP 6000 2U
2013.05 | V3 | DOC Quick Installation Guide Bosch Sicherheitssysteme GmbH